Abstract:This work presents an investigation on the compressive strain capacity of resisting buckling on an X80 steel corroded pipeline subjected to a bending moment using nonlinear finite element analysis (FEA) validated by full-scale tests. The modelling results indicate that the existing strain-based assessment method is not suitable for pipelines with deep corrosion and has certain application limitations. Consequently, a new evaluation method based on far-field strain was developed to predict the buckling failure of corroded pipelines subjected to bending loads. The influence of the corrosion shape type, corrosion size (i.e., depth d, length L, and width w), pipe geometry, and internal pressure on the critical buckling strain capacity and critical buckling moment of the pipeline were studied using parameter sensitivity analysis to verify the proposed strain criteria. The results illustrate that the variation trends between the critical buckling strain and the critical buckling moment with each factor were consistent, indicating that the proposed novel strain-based evaluation method is effective and applicable. In addition, the buckling resistance of a pipeline with rectangular corrosion is relatively weaker than that with a semi-spherical corrosion pit or cylindrical grooved corrosion under the same defect size. Further, the critical compressive strain capacity of a corroded pipeline is primarily affected by the depth and width of the corrosion, whereas the effect of the corrosion length is relatively insignificant. Moreover, the critical length and width of the corrosion defect affecting the bending capacity of resisting buckling were determined as L∕Dt=20 and w∕πD=0.5, respectively.

Buckling response of subsea pipeline with irregular corrosion defect under external pressure

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Experimental and numerical studies on collapse of subsea pipelines with interacting corrosion defects

On Collapse Failure Analysis Of Subsea Corroded Sandwich Pipelines Under External Pressure

Theoretical analysis of the collapse behaviour of subsea pipelines with corrosion defects under external pressure

Effect of Steel Properties on Buckling Pressure of Corroded Pipelines

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

Buckling analysis of subsea pipeline with idealized corrosion defects using homotopy analysis method

Buckling Strength of Corroded Pipelines with Interacting Corrosion Defects: Numerical Analysis

On the Collapse of Thick-Walled Pipes with Corrosion Defects under External Pressure

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

A novel strain-based assessment method of compressive buckling of X80 corroded pipelines subjected to bending moment load

Failure pressure analysis of corroded moderate-to-high strength pipelines

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Analytical prediction of failure pressure for pipeline with long corrosion defect

Failure assessment of X80 pipeline with interacting corrosion defects

Study on burst pressure of subsea pipelines with asymmetrical corrosion defects

Buckle Propagation of Offshore Pipelines under External Pressure