Abstract:As a new composite material with high strength, toughness, and heat resistance, the continuous fiber-reinforced polyaryl ether sulfone ketone (PPESK) thermoplastic resin matrix composite (CFRP) has a wide temperature range, which is attributed to the complex temperature sensitivity of the matrix. The failure evolution characteristics under different conditions are not clear yet, which significantly limits its development and application to high-precision equipment. In this work, in order to deeply explore the full three-dimensional (3D) multi-scale multi-physics damage evolution mechanism of the CFRP over a wide temperature range, macroscale cross-temperature stretching/bending experiments, computer tomography (CT) scanning, and microscale scanning electron microscopy (SEM) are performed to effectively capture the overall damage morphology and local fiber/matrix damage failure characteristics of the material. The results show that the reinforcement with continuous fibers increases the tensile strength of the CFRP by 14–45 times and its bending strength by 2–6 times compared to those of the PPESK matrix in the cross-temperature domain. Moreover, the main failure mechanism of the CFRP in the cross-temperature domain is matrix crushing and fiber fracture at room temperature and fiber fretting slip and matrix viscous flow at high temperatures. This further explains the deformation mechanism of the CFRP, which can maintain its stability at high temperatures (low elongation at break: 1%–1.2%). The unique trans-temperature regional energy evolution and continuous fiber reinforcement of the material matrix resin PPESK lay the synergic stability of the high temperature performance and damage morphology of the CFRP. In particular, a cell model is constructed to further reveal the damage evolution characteristics of the matrix, fiber, and interface of the CFRP at the micro-scale. Combined with the failure mode theory and the performance degradation mechanism of composite materials, the temperature influence factor is introduced to formulate a multi-scale full 3D temperature-dependent damage evolution constitutive model of the CFRP over a wide temperature range. The constitutive model of the CFRP is incorporated in finite element software, and the simulation results are compared with the experimental ones for validation. The results show that the model developed in this work can effectively characterize the complex mechanical damage morphology and progressive failure characteristics of the CFRP over a wide temperature range.

Nonlinear constitutive model of CFRP composites under constant direct current: combined effects of thermal damage and dielectric degradation

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Modeling of Load Responses and Aging of High Strength Fibers Considering UV-radiation

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Complete Constitutive Model of CFRP Including Continuous Damage in Low Strain Rate Compression and Temperature Generation in High Strain Rate Impact

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

A Damage Model Based on the Introduction of a Crack Direction Parameter for FRP Composites under Quasi-Static Load

An Anisotropic Damage-Plasticity Constitutive Model of Continuous Fiber-Reinforced Polymers

Finite Element Method of a Progressive Intralaminar and Interlaminar Damage Model for Woven Fibre Laminated Composites under Low Velocity Impact

Progressive Failure Analysis of Carbon Fiber/epoxy Composite Laminates Using Continuum Damage Mechanics

Damage Model of Carbon-Fiber-Reinforced Concrete Based on Energy Conversion Principle

Modeling and evaluation of dynamic degradation behaviours of carbon fibre-reinforced epoxy composite shells

Damage evolution model and failure mechanism of continuous carbon fiber-reinforced thermoplastic resin matrix composite materials

Study on deterioration of mechanical properties and voltage-strength theoretical model of CFRP/ conductive ECC composites under coupling effect of anode polarization, load and erosion environment

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

Analysis of Cord-Rubber Composite Response Using the Nonlinear Continuum Damage Mechanics Approach

A Dynamic Constitutive Model and Simulation of Braided CFRP under High-Speed Tensile Loading

A Constitutive Model for Carbon Fiber Reinforced Epoxy Resin Laminate under Compression Load: Considering the Initial Non-linearity

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact