Abstract:In this paper, the synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT) by cyclic voltammetry (CV) electrochemical deposition and its application in the counter electrode of solid-state dye-sensitized solar cells were studied. The influence of cycle times (10 similar to 50 times) on the morphology, thickness and optical properties of PEDOT films were explored by Fourier transform infrared spectroscopy (FTIR), atomic force microscope (AFM), scanning electron microscope (SEM) and ultraviolet-visible spectroscopy (UV-Vis). The photoelectrochemical properties of solid-state dye-sensitized solar cells based on PEDOT transparent counter electrode were characterized by J-V, electrochemical impedance spectroscopy (EIS), intensity modulated photocurrent spectrum/photovoltage spectrum (IMPSNS) and Tafel analysis. The results showed that an un-uniform film with the thickness of 0.5 mu m and light transmittance of 80% was formed when CV cycle times was 10, where the PEDOT film was not completely covered on the substrate. When the CV cycles reached 30 similar to 40, a uniform and dense transparent film was obtained and the highest photo-electric conversion efficiency of the corresponding solid-state dye-sensitized solar cells reached 5.34%. This is because uniform and dense surface, good optical properties and high photo- electric catalysis properties (J(0) =2.51 X 10(-3) A.cm(-2)) for I-3 in the electrolyte, made the device obtain larger diffusion coefficient (D-n=28.80 mu m(2).ms(-1)) and carrier diffusion length (L = 21 .41 mu m), which were favorable for charge transfer. When the number of CV cycles was further increased to 50 times, showing greater roughness, the PEDOT fihn was no longer growing uniformly. The PEDOT film deposited on the FTO surface underwent some dissolution and desorption, the PEDOT film became uneven, and the catalytic activity of PEDOT electrode to I-3(-) in electrolyte was reduced. The device with PEDOT transparent counter electrode fihn deposited by cyclic voltammetry could also achieve double-side illumination with good catalytic activity to the electrolyte. Under the condition of double-side illumination, the photoelectric performance of the device using electrodeposited PEDOT as transparent counter electrode was improved by about 20%. The improvement of the photoelectric performance of the device is mainly due to the increase in the absorption of photons by the double-sided illumination.

Investigating the energy storage mechanism of modified PEDOT:PSS for enhanced electrochemical performance

Self-healing electrochromic energy storage device based on PEDOT:PSS

Poly(3,4-ethylenedioxythiophene) Encapsulation/intercalation Boosting Stability and Zinc Ion Storage Properties of Vanadyl Phosphates

A Mo doping WO 3 /CdZnS heterojunction photoelectrode for boosting electron storage capacity

Assemble a new functional PEDOT-ZIS electrode for sustainable and efficient treatment of wastewater in photoelectrocatalytic system

Investigating PEDOT:PSS Binder as an Energy Extender in Sulfur Cathodes for Li-S Batteries

Performance Enhancement of Self-Powered Electrochromic Device via a PEDOT:PSS Electrode Inherited with Intrinsic Roughness of Substrate

Flexible PEDOT:PSS nanopapers as “anion-cation regulation” synergistic interlayers enabling ultra-stable aqueous zinc-iodine batteries

Enhanced Lithium Storage Property Boosted by Hierarchical Hollow-Structure WSe 2 Nanosheets/N, P-Codoped Carbon Nanocomposites

A theoretical mechanistic study on electrical conductivity enhancement of DMSO treated PEDOT:PSS

High Performance of Supercapacitor from PEDOT:PSS Electrode and Redox Iodide Ion Electrolyte

Interfacial Polymerization of PEDOT Sheath on V2O5 Nanowires for Stable Aqueous Zinc Ion Storage

Rationalization of Microstructure Modulation and Doping on the Enhancement Mechanism of Thermoelectric Properties of PEDOT:PSS

Hierarchical Nanostructured WO3 with Biomimetic Proton Channels and Mixed Ionic-Electronic Conductivity for Electrochemical Energy Storage

Coupling Electro-Chemo- Thermodynamics with Water in Salt (WIS) Electrolyte for Enhanced Pseudocapacitive Charge Storage

Enhancing the Electrical Conductivity and Long-Term Stability of PEDOT:PSS Electrodes through Sequential Treatment with Nitric Acid and Cesium Chloride

Electrochemical Synthesis of PEDOT and Its Application in Solid-State Dye-sensitized Solar Cells

Pedot:Pss-Assisted Polyindole Hollow Nanospheres Modified Carbon Cloth As High Performance Electrochemical Capacitor Electrodes

Solution-Processed Interfacial PEDOT:PSS Assembly into Porous Tungsten Molybdenum Oxide Nanocomposite Films for Electrochromic Applications

3D Nanothorn Cluster-Like Zn-Bi2S3 Sensitized WO3/ZnO Multijunction with Electron-Storage Characteristic and Adjustable Energy Band for Improving Sustained Photoinduced Cathodic Protection Application

Co-electro-deposition of the MnO2–PEDOT:PSS Nanostructured Composite for High Areal Mass, Flexible Asymmetric Supercapacitor Devices