Abstract:In this study, a new traction‐separation based constitutive model for use in finite element simulation of masonry joints under complex loading conditions is developed for cohesive elements. The proposed model is formulated using damage parameters and plastic deformation with mutual couplings, and can accurately simulate the complex nonlinear behaviors of masonry joints considering hardening or softening of strength and stiffness degradation. To enhance the numerical stability of the model, plasticity and damage are separated algorithmically and implemented in two phases. In the first phase, the plastic deformations are treated using a multi‐surface plasticity model composed of a smooth hyperbolic yield surface for tension‐shear mixed‐mode failure and an elliptical cap primarily for the compressive failure. This is implemented in effective stress space and helps restrict the evolution of yield surfaces with no softening, significantly enhancing the efficiency of stress return mapping by the closed point projection method. In addition, an adaptive sub‐stepping scheme is adopted to further improve the robustness of the numerical implementation. In the second phase, nominal stresses are computed from the effective stresses using damage parameters. The evolution of these damage parameters is defined in terms of plastic work which is defined by a polynomial form, and is recommended in this study for a better calibration capability. Improvements are made in the formulation of compressive cap including incorporation of hardening of strength and stiffness degradations as these are ignored in existing interface models. This approach helped improve simulation of masonry under cyclic loads with tension‐compression transitions. For the structural level applications, the interface model is implemented within a finite element program, which is utilized to simulate failure of a number of masonry specimens under in‐plane/out‐of‐plane monotonic/cyclic loading. The simulated results are rigorously validated with existing experimental data that shows a good potential in modeling masonry structures.

Calibrating failure surfaces for vertically perforated clay block masonry using a validated numerical unit cell model

Simulation Of Collapse Process Of Masonry Walls Based On Expanded Discrete Element Method

A robust computational strategy for failure prediction of masonry structures using an improved multi‐surface damage‐plastic based interface model

3D hybrid modelling approach combining the finite and discrete element methods: Validation based on masonry shear wall tests

Macromechanical Failure Criteria: Elasticity, Plasticity and Numerical Applications for the Non-Linear Masonry Modelling

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

A block-based numerical strategy for modeling the dynamic out-of-plane behavior of unreinforced brick masonry walls

A machine learning based material homogenization technique for in-plane loaded masonry walls

Numerical Simulation of Masonry-Infilled RC Frames Using XFEM

Numerical homogenization‐based seismic assessment of an English‐bond masonry prototype: Structural level application

Masonry elements strengthened through Textile-Reinforced Mortar: application of detailed level modelling with a free open-source Finite-Element code

A Mesoscale Approach for Concrete Block Masonry

Comparison of Continuous and Discrete Modeling Strategies for the Structural Assessment of a Masonry Vault Under Dynamic Seismic Loading

A Practical Multi-cross-line Model for Simulating Nonlinear Cyclic Behavior of Reinforced Concrete Shear Wall in Super High-Rise Buildings

Discrete-element Method Modelling of Structural Clay

Numerical and Experimental Investigation on Cyclic Behavior of Masonry Infill Walls Retrofitted with CFRP

Simulating the damage of rubble stone masonry walls using FDEM with a detailed micro-modelling approach

Simulation of Masonry Wall using Concrete Damage Plasticity Model

Combined Finite-Discrete Element Model Simulations of Shake-Table Tests on a Full-Scale Masonry Cross Vault

Nonlinear finite and discrete element simulations of multi-storey masonry walls

Micromechanics-Based Simulations of Compressive and Tensile Testing on Lime-Based Mortars