Abstract:Benefitting from high-temperature operating conditions, solid GO oxide fuel cells (SOFCs) exhibit high electricity efficiency and can be coupled with conventional engines such as gas turbines, to achieve cascaded energy utilization. However, high temperature inevitably accelerates material deterioration, and simultaneously complicates the on-line diagnosis of SOFCs. Electrochemical impedance spectroscopy (EIS) is a mature on-line testing technology that is been widely used in SOFC research. Using EIS analyses, researchers can clearly determine the ohmic resistance of pure ion/electron conduction and the magnitude of the polarization impedance of electrochemical processes or diffusion. However, the lack of decomposition of polarization impedance constitutes a limitation for the deeper understanding 'YSZk of SOFC operation. To better utilize information-rich EIS, this work used a typical Ni-Y2O3 stabilized zirconia (Ni-YSZ) anode-supported SOFC and designed a complete set of impedance tests by modifying the test temperature, anode operating atmosphere, and cathode operating atmosphere. In addition, this study combined two advanced impedance spectrum analysis methods: the analysis of differences in impedance spectra (ADIS) and distribution of relaxation time (DRT) methods to allow for a deeper comprehension of the impedance spectrum and obtain the characteristic frequency of each process in the SOFC. Based on the characteristic frequency obtained by the spectral decomposition, this study analyzed and explained the physical or (electro-) chemical origins of the impedance in each frequency band. In addition, the equivalent circuit method (ECM) was adopted to fit the SOFC impedance spectra by 6 (RQ) parallel circuits to summarize the impedance distribution. The ADIS method was more convenient than the DRT method and could be used to initially determine the range of characteristic frequencies. However, it failed to provide a clear decomposition for the high-frequency region of the impedance spectrum. The DRT method can yield a good decomposition of a single impedance spectrum, and the characteristic frequency of Ni-YSZ SOFC was separated into similar to 2, similar to 20, similar to 30, 1 x 10(3)-1.5 x 10(3) , 2 x 10(3)-4 x 10(3), and similar to 4 x 10(4) Hz regions. The highest frequency (similar to 4 x 10(4)) region was dominated by charge transfer impedance at the YSZ/GDC (gadolinia doped ceria) or LSCF/GDC interface. Peaks at 2 x 10(3)-4 x 10(3) and 1 x 10(3)-1.5 x 10(3) Hz correspond to the H-2 electrochemical reaction at the Ni/YSZ/H-2 boundary and O-2 reduction at the LSCF/O-2 boundary, respectively. The impedance at lower frequencies can be explained by diffusion polarization impedance. In this study, similar to 20 Hz corresponds to the cathode diffusion impedance, and similar to 30 Hz corresponds to the anode diffusion resistance. At a frequency of similar to 2 Hz, the impedance magnitude is influenced by both cathode and anode diffusion. The results of this study combined three methods (ADIS, DRT, and ECM) for SOFC impedance investigations, and lays a foundation for future studies regarding SOFC performance degradation and degradation characteristics based on DRT analysis.

Electrochemical characterization of electrolyte supported solid oxide electrolysis cell during CO2/H2O co-electrolysis

Understanding the Occurrence of the Individual CO2 Electrolysis During H2O-CO2 Co-Electrolysis in Classic Planar Ni-YSZ/YSZ/LSM-YSZ Solid Oxide Cells

Electrochemical Characterization and Mechanism Analysis of High Temperature Co-electrolysis of CO2 and H2O in a Solid Oxide Electrolysis Cell

Performance and Methane Production Characteristics of H2O–CO2 Co-Electrolysis in Solid Oxide Electrolysis Cells

Improved Performance and Stability of Ag-infiltrated Nanocomposite La0.6Sr0.4Co0.2Fe0.8O3−δ-(Y2O3)0.08(ZrO2)0.92 Oxygen Electrode for H2O/CO2 Co-Electrolysis

Carbon Monoxide/carbon Dioxide Electrochemical Conversion on Patterned Nickel Electrodes Operating in Fuel Cell and Electrolysis Cell Modes

La0.8Sr0.2Co0.8Ni0.2O3-δ Impregnated Oxygen Electrode for H2O/CO2 Co-Electrolysis in Solid Oxide Electrolysis Cells

Syngas Production on a Symmetrical Solid Oxide H2O/CO2 Co-Electrolysis Cell with Sr2Fe1.5Mo0.5O6–Sm0.2Ce0.8O1.9 Electrodes

Direct Electrolysis of CO2 in Solid Oxide Cells Supported on Ceramic Fuel Electrodes with Straight Open Pores and Coated Catalysts

Different Performance and Mechanisms of CO2 Electrolysis with CO and H2 As Protective Gases in Solid Oxide Electrolysis Cell

Reaction Mechanism and Rate-Determining Step Speculation of Reversible CO/CO2 Electrochemical Conversion on the Nickel Patterned Electrodes

Sulfur Tolerant LSCM‐based Composite Cathode for High Temperature Electrolysis/Co‐electrolysis of H2O and CO2

A Comparative Study of the Performance and Electrode Processes of Solid Oxide H<sub>2</sub>O Electrolysis and CO<sub>2</sub> Electrolysis

Carbon Deposition in Solid Oxide Cells During Co-Electrolysis of H2O and CO2

Electrochemical characteristics of patterned nickel electrodes on single-crystal YSZ in CO/CO2 atmospheres for operating in fuel cell/electrolysis cell modes

Mechanism and Kinetics of Ni-Y2O3-ZrO2Hydrogen Electrode for Water Electrolysis Reactions in Solid Oxide Electrolysis Cells

Reaction Characteristics of Hydrocarbon Production by H20-C02 Co-electrolysis in Solid Oxide Electrolysis Cells

Optimization of Sm0.5sr0.5coo3-Delta-Infiltrated Ysz Electrodes for Solid Oxide Fuel Cell/Electrolysis Cell

Direct CO 2 Electrolysis on Symmetric La 0.8 Sr 0.2 Cr 0.5 Fe 0.5 O 3−δ -Zr 0.84 Y 0.16 O 2−δ Electrode-Supported Solid Oxide Electrolysis Cells

Operando Studies on Solid Oxide Ceria Electrodes during CO2 Electroreduction

Differentiation and Decomposition of Solid Oxide Fuel Cell Electrochemical Impedance Spectra