Abstract:This study aims to improve the performance of magnesium phosphate cement-based engineered cementitious composites (MPC-ECC) and establish a systematic design method. The MPC-ECC with ultra-high ductility was prepared with the polyethylene (PE) fibers. The effect of the magnesium oxide to potassium dihydrogen phosphate mass ratio (M/P), quartz sand particle size (Sd), water to solid mass ratio (W/S), sand to binder mass ratio (S/B), fly ash (FA) content and fiber volume fraction (Vf) on the micro-mechanical properties and macro-mechanical properties of MPC-ECC were explored. The macro-mechanical properties of MPC-ECC with different curing temperatures and curing ages were also tested. And the SEM test was carried out to analyze the morphology of the MPC-ECC. The results showed that the ultimate tensile strain of MPC-ECC with optimal proportion can reach 7.1%. Even curing at −10 °C for 7 days, the ultimate tensile strain can reach 5.6%, and the compressive strength can reach nearly 20 MPa. And the microstructure is characterized by a highly dense morphology. Additionally, with the increase of M/P, the compressive strength of MPC-ECC increases, but the ultimate tensile stress decreases. The MPC-ECC with the Sd of 150–180 mesh shows significant strain hardening performance, and its ultimate tensile strain can exceed 5%. The large W/S is helpful to improve strain hardening performance, especially when the S/B is 0.2. In addition, when the FA content is 30% or 40%, the strain hardening performance of MPC-ECC is significant. The quantitative association model between ultimate tensile strain and pseudo strain-hardening indices was established. According to the association model, the design method of MPC-ECC was established, based on which the MPC-ECC with desired ductility can be realized. Meanwhile, the PSH σ and PSH J are recommended to reach 2.15 and 25.1, respectively, at the same time for the MPC-ECC with ultimate tensile strain of above 3%.

Microstructure and micromechanical properties of magnesium phosphate cement

Microstructure of Magnesium Potassium Phosphate Cement

Experimental Research on Mechanical Properties and Microstructure of Magnesium Phosphate Cement-Based High-Strength Concrete

Study on flexural resistance and hydration mechanism of magnesium phosphate cement

Hydration properties of magnesium phosphate cement paste mixed with metakaolin and silica fume

Improvement of physico-mechanical and microstructural properties of magnesium phosphate cement composites comprising with Phosphogypsum

Preparation and properties of a magnesium phosphate cement with dolomite

Thermodynamic study on the phase assemblage of MPC exposed to natural and accelerated carbonation conditions

Development and characterization of magnesium phosphate cement based ultra-high performance concrete

Impact of metakaolin on hydration properties of magnesium phosphate cement

Property Assessment of Magnesium Phosphate Cement

Influence of curing conditions on mechanical properties and microstructure of magnesium potassium phosphate cement

A New Magnesium Phosphate Cement Based on Renewable Oyster Shell Powder: Flexural Properties at Different Curing Times

Durability of Magnesium Potassium Phosphate Cements (MKPCs) under Chemical Attack

Magnesium phosphate cement-based engineered cementitious composites with polyethylene fibers: Performance improvement and design method

Calcium silicate cements endowing bioactivity and sustaining mechanical strength of low-heat-releasing and fast-curing magnesium phosphate cements

Effect of water content on microstructure and properties of magnesium potassium phosphate cement pastes with different magnesia‐to‐phosphate ratios

A Systematic Review on Properties of Magnesium Phosphate Cement Modified by Mineral Admixtures

Research progress on the setting time and solidification mechanism of magnesium phosphate cement: A review

Early properties of magnesium phosphate cement repairing material used in slab track

Effect of K+ Diffusion on Hydration of Magnesium Potassium Phosphate Cement with Different Mg/P Ratios: Experiments and Molecular Dynamics Simulation Calculations