Abstract:The development of society is dependent on commodities such as fuels and chemical feedstock. Most of these commodities are obtained from oil as raw material. Although the need to find a friendly solution to couple an economically viable energy model with a greener solution, it is known that technologies applying renewable sources are in an early stage of development. The conversion of methane into clean fuels or chemical feedstock with high commercial value, such as hydrogen, ethylene, or methanol is interesting from the energetic and economic point-of-view. Among the methods of methane conversion, the industrially used is the steam reforming (MSR), in which methane reacts with water to produce syngas, a mixture of CO and H2. Nevertheless, this reaction is highly endothermic and responsible for a large volume of CO2 emitted by the reactor burners that provide energy to the reactors. An interesting alternative process for methane conversion is the dry reforming of methane (DRM), which consists of the reaction of methane with CO2, also yielding syngas. The advantage of this reaction is the utilization of two harmful gases to the atmosphere. The disadvantage of this reaction is due to the catalyst deactivation by carbon deposition. In heterogeneous catalysis, there is a strong relationship between catalytic performance and surface and textural properties, that are outlined by the number and distribution of available active sites. In this way, different synthetic routes may be used to design these properties and obtain products of commercial interest, such as ethylene. The commercial production of ethylene occurs by the recuperation of refinery gases, thermal cracking of light hydrocarbons, mainly ethane and propane, or a combination of both processes. An alternative process of ethylene production may be from natural gas and or biogas. This process can be performed by the syngas route or by oxidative coupling of methane (OCM). The first process is an indirect conversion of methane and involves several steps, which increases the process costs. The second one is a direct conversion, where methane is directly converted into C2 (ethane and ethylene) hydrocarbons. Although the OCM is not yet a reaction on an industrial scale, several efforts are being made to design a catalytic system to achieve C2 hydrocarbons yields above 30%, the minimum required. Besides that, another technology has been studied to directly produce ethylene via the oxidative coupling of methane using CO2 as a mild oxidant (CO2-OCM). These technological routes for the valorization of methane and CO2 will be addressed in this review.

Progress of Commercial Technologies for Producing Syngas and Hydrogen from Hydrocarbon Gases

Non-Catalytic Partial Oxidation of Hydrocarbon Gases to Syngas and Hydrogen: A Systematic Review

Technologies for Direct Production of Flexible H2/CO Synthesis Gas

From methane to hydrogen: A comprehensive review to assess the efficiency and potential of turquoise hydrogen technologies

Conversion of Natural Gas to Hydrogen under Super Adiabatic Rich Combustion

Catalytic Hydrogen Production from Methane: A Review on Recent Progress and Prospect

Hydrogen Production: State of Technology

A review of methane pyrolysis technologies for hydrogen production

Effect of СО2 Additives on the Noncatalytic Conversion of Natural Gas into Syngas and Hydrogen

Recent trends and fundamental insights in the methanol-to-hydrocarbons process

Progress of Study on Hydrogen Production by Reformings of Hydrocarbons and Alcohols

Current status of research on the synthesis of hydrogen, hydrocarbons and conversion of carbon dioxide in the framework of reducing anthropogenic pressure on the environment and switching to environmentally friendly energy sources

Overall Insights into Sustainable Utilization of Methane and Carbon Dioxide in Heterogeneous Catalysis

Actual Quality Changes in Natural Resource and Gas Grid Use in Prospective Hydrogen Technology Roll-Out in the World and Russia

Biogas to chemicals: a review of the state-of-the-art conversion processes

Hydrogen Technologies: A Critical Review and Feasibility Study

Direct Conversion of Methane to Value-Added Chemicals over Heterogeneous Catalysts: Challenges and Prospects.

Combined Production of Hydrogen and Methanol without CO2 Emission Based on Matrix Conversion of Natural Gas

Methane up-carbonizing: A way towards clean hydrogen energy?

Sorption-enhanced Steam Methane Reforming for Combined CO2 Capture and Hydrogen Production: A State-of-the-Art Review

Hydrogen production through sorption-enhanced steam methane reforming and membrane technology: A review