Abstract:Abstract The behaviour of concrete in fire depends on its mix proportions and constituents and is determined by complex physicochemical transformations during heating. Normal‐strength concretes and high‐performance concretes microstructurally follow similar trends when heated, but ultra‐high‐performance concrete behaves differently. A key property unique to concrete amongst structural materials is transient creep. Any structural analysis of heated concrete that ignores transient creep will yield erroneous results, particularly for columns exposed to fire. Failure of structural concrete in fire varies according to the nature of the fire; the loading system and the type of structure. Failure could occur from loss of bending or tensile strength; loss of bond strength; loss of shear or torsional strength; loss of compressive strength; and spalling of the concrete. The structural element should, therefore, be designed to fulfil its separating and/or load‐bearing function without failure for the required period of time in a given fire scenario. Design for fire resistance aims to ensure overall dimensions of the section of an element sufficient to keep the heat transfer through this element within acceptable limits, and an average concrete cover to the reinforcement sufficient to keep the temperature of the reinforcement below critical values long enough for the required fire resistance period to be attained. The prediction of spalling – hitherto an imprecise empirical exercise – is now becoming possible with the development of thermohydromechanical nonlinear finite element models capable of predicting pore pressures. The risk of explosive spalling in fire increases with decrease in concrete permeability and could be eliminated by the appropriate inclusion of polypropylene fibres in the mix and/or by protecting the exposed concrete surface with a thermal barrier. There are three methods of assessment of fire resistance: (a) fire testing; (b) prescriptive methods, which are rigid; and (c) performance‐based methods, which are flexible. Performance‐based methods can be classified into three categories of increasing sophistication and complexity: (a) simplified calculations based on limit state analysis; (b) thermomechanical finite element analysis; and (c) comprehensive thermohydromechanical finite element analysis. It is only now that performance‐based methods are being accepted in an increasing number of countries.

Bayesian Updating Methodology for the Post-fire Evaluation of the Maximum Temperature Profile Inside Concrete Elements

A Bayesian Model Updating Approach Applied to Mechanical Properties of Recycled Aggregate Concrete under Uniaxial or Triaxial Compression

Experimental investigation on the effect of natural fire exposure on the post‐fire behavior of reinforced concrete beams using electric radiant panel

Microstructure investigation, strength assessment, and thermal modelling of concrete exposed to different heating cooling regimes

A Numerical Method for Estimating the Maximal Temperature Gradients Reached in Fire-Damaged Concrete Structures Based on the Parameter Identification

Infrared Thermal Image Method and Ultrasonic Rebound Method in Assessing Fire-Damaged Concrete

SEM Image-based Porosity Analysis of Fire Damaged High Strength Concrete

Residual Flexural Capacity Prediction in Heat-Affected Concrete Members through Ground Penetrating Radar and Thermal Imaging

Bayesian updating of relationships between crack width and corrosion level in reinforced concrete based on a large set of experimental data

Investigation of Fire Effects on Reinforced Concrete Members via Finite Element Analysis.

Optimizing Building Rehabilitation through Nondestructive Evaluation of Fire-Damaged Steel-Fiber-Reinforced Concrete

Multiscale Prediction of Thermal Damage for Hybrid Fibers Reinforced Cementitious Composites Blended with Fly Ash at High Temperatures

Structural modal identification and MCMC-based model updating by a Bayesian approach

Bayesian procedures for updating deterioration space-time models for optimizing the utility of concrete structures

INVESTIGATING FIRE-INDUCED DAMAGE ON FIBER-REINFORCED CONCRETE SAMPLES USING NONDESTRUCTIVE EVALUATION METHODS

ESTIMATION OF THE TEMPERATURE DISTRIBUTION IN CONCRETER STRUCTURES AFTER FIRE BY STATIC PARAMETER IDENTIFICATION

Influence of concrete cover and transverse reinforcement on residual post-fire bond performance of reinforcement in concrete

Performance of Concrete Structure after Fire Disaster Based on Thermal Stress Coupling Field Analysis

Vibration-based Bayesian model updating of civil engineering structures applying Gaussian process metamodel

Effect of fire on concrete and concrete structures

The Comprehensive Assessment Method of Concrete Damage after Disastrous Fire Based on Game Theory-Normal Cloud Model