Abstract:Preparation of modified 3D MWK reinforced composites and their mechanical properties and failure mechanisms Three‐dimensional multi‐axial warp knitted (3D MWK) reinforced composites are important components of advanced structural composites. The interfacial bonding between fiber and matrix is key to achieving high mechanical properties. In this work, graphene oxide (GO) and poly(oxypropylene) diamines (D400) were grafted on glass fiber (GF) multi‐axial warp knitted (MWK) fabrics to construct a "flexible‐rigid" structure. The surface morphologies of GF were characterized by SEM and EDS. Then, 3D MWK‐reinforced composites were prepared based on four kinds of modified fabrics using the VARTM method. The in‐plane compression properties were obtained at different high temperatures and their failure modes were analyzed. The strain–stress curves showed that the composites exhibited brittle fracture modes. D400 and GO‐modified multi‐scale composites exhibited outstanding compression properties. The strength of the related composited was improved by 55.78%, 76.78%, 52.19%, and 56.78% compared to that of desized composite at 30°C, 60°C, 120°C and 150°C, respectively. The damage to D400‐GO modified and D400 modified composites was the most serious, where shear fracture modes were obvious in addition to layer debonding features. This protocol provides a potential strategy to manufacture of D400 and GO‐modified hierarchical reinforced composites. Highlights The modified 3D MWK glass fabrics based on poly(oxypropylene) diamines (D400) and graphene oxide (GO) were prepared. The compressive properties of 3D desized, D400‐, D400‐GO‐, and GO‐MWK fabrics reinforced epoxy composites were obtained and analyzed at different temperatures of 30°C, 60°C, 120°C, and 150°C. The failure mechanisms of 3D desized, D400‐, D400‐GO‐, and GO‐MWK fabrics reinforced epoxy composites at different temperatures were analyzed.

Out‐of‐plane compression properties and failure mechanism of gradient 3D woven composites

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Research on the thermal conductivity and ablation performance of gradient 3D woven carbon/carbon composite

Compaction behavior of 3D woven preforms with hybrid fibers and under different process parameters

The formation mechanism of gradient properties and the regulation mechanism of elastic properties in three‐dimensional tubular braided composites

Electromagnetic wave absorbing and bending properties of 3D gradient structured woven composites: experiment and simulation

Mechanical performance of composites based on various three-dimensional woven-fibre preforms

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

Effect of Different Z-directional Fibers on Mechanical Properties of Composites Using Numerical and Experimental Tests

Multi-directional compression behaviors and failure mechanisms of 3D orthogonal woven composites: Parametric modeling and strength prediction

Impact Response of 3D Orthogonal Woven Composites with Different Fiber Types

3D printing of polycaprolactone-based composites with diversely tunable mechanical gradients via multi-material fused deposition modeling

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression

Effect of stable-structural 3D woven preform on tensile and flexural properties of carbon fiber/epoxy composites

Experimental and numerical validation of high strain rate impact response and progressive damage of 3D orthogonal woven composites

In‐plane compressive properties and failure mechanisms of modified three‐dimensional multi‐axial warp knitted fabrics reinforced composites at different temperatures

Anisotropy characteristics of electrical conductivity and compressive strength of 3D carbon fiber/epoxy angle-interlock woven composites

Study on in-plane compression properties and numerical modeling of three dimensional five-directional braided composites

Size-dependent mechanical behaviors of 3D woven composite under high strain-rate compression loads