Abstract:Abstract TiAlCoCr x FeNihigh-entropy alloys (HEAs) coatings were fabricated on the surface of Ti6Al4V by laser cladding. Their microstructural evolution with the increase in x value (x = 0, x = 1.0, x = 2.0) was investigated in detail. Besides that, the investigation into the effects of the Cr content on their corrosion behaviors and mechanical properties (in terms of hardness and wear resistance) was also carried out comprehensively. The results indicated that two kinds of phases (a solid solution with thehexagonal close-packed (HCP) structureand Ti 2 Ni) were synthesized in the coatings, and the HCP content was gradually increased with the increase in x accompanied with the decrease in Ti 2 Ni content. A HEA coating only composed of single HCP was successfully prepared when x reached 2.0. The electrochemical and immersion tests all confirmed that the coating with x = 2.0demonstrated the most excellent corrosion resistance in a0.1 mol·L −1 HCl solution from different aspects including corrosion tendency and corrosion rate without the applied potential, the formation difficult/stability of the passive film and the dissolution rate in the passive state, and corrosion surface morphology. The averagemicrohardness values of the coatings weregraduallyincreasedfrom 656HV 0.2 to 800 HV 0.2 with increasing xfrom 0 to 2.0, which wereabout double that of the substrate (350 HV 0.2 ). Wear resistance of the coatings also exhibited the upward tendency with increasing the x values (0.562 mm 3 at x = 2.0, 0.640 mm 3 at x = 1.0, 0.641 mm 3 at x = 0 and 1.419 mm 3 for the substrate). More Cr addition into the cladding material will contribute to the formation of a HEA coating composed of single HCPwith excellent corrosion and wear resistance.

Construction of hard BCC phases FeCrVMnTi x wear-resistant high-entropy alloy coatings enhanced by solid solution of Ti elements

Construction of Hard BCC Phases FeCrVMnTix Wear-Resistant High-Entropy Alloy Coatings Enhanced by Solid Solution of Ti Elements

Cultivating a Comprehensive Understanding of Microstructural Attributes and Wear Mechanisms in FeCrCoNiAlTi x High-Entropy Alloy Coatings on TC6 Substrates Through Laser Cladding Fabrication

Microstructure and Tribological Performance of Ultra-High Speed Laser-Cladded AlCrCoFeNi2.1-xTiB2 (x = 0, 0.5, 1.0, 1.5 and 2.0 Wt%) High-Entropy Alloy Coatings

Microstructures and Wear Resistance of CoCrFeNi2V0.5Tix High-Entropy Alloy Coatings Prepared by Laser Cladding

Microstructure and Friction Properties of CoCrFeMnNiTix High-Entropy Alloy Coating by Laser Cladding

In-situ TiC reinforced CoCrCuFeNiSi<sub>0.2</sub> high-entropy alloy coatings designed for enhanced wear performance by laser cladding

On the enhanced wear resistance of laser-clad CoCrCuFeNiTix high-entropy alloy coatings at elevated temperature

Investigation into corrosion and wear behaviors of laser-clad coatings on Ti6Al4V

Microstructure and Wear Behavior of AlCrTiNbMo High-Entropy Alloy Coating Prepared by Electron Beam Cladding on Ti600 Substrate

Fabrication of Eutectic FeCrCoNiV1.5 High Entropy Alloy Coating with Excellent High-Temperature Wear Resistance

High-Temperature Tribological Behavior of Al0.3Cr0.5Fe1.5Mn0.5Ni High-Entropy Alloys With Addition of Titanium and Carbon

Microstructure and wear resistance of in-situ TiC reinforced AlCoCrFeNi-based coatings by laser cladding

Mechanical properties and wear behaviors of FeCoNiCrMnTix high-entropy alloys manufactured by vacuum arc melting

Microstructure and tribological properties of in-situ M x B reinforced CoCrFeNi HEA composites prepared by laser cladding

Effect of Ti content on wear and high-temperature oxidation resistances of laser-clad CoCrMoNbTi x high-entropy alloy coating

Wear and high-temperature oxidation resistance of (AlCrFeTiV)100-xNix high-entropy alloy coatings prepared by laser cladding on Ti6Al4V alloy

Microstructure, thermostability and tribological behavior of composite CoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding

Effects of Ti content on the microstructure and properties of AlCoCrFeNiTix high-entropy alloys prepared by laser cladding

Microstructure and Properties of CoCrFeNiMnTix High-Entropy Alloy Coated by Laser Cladding

Design and Characterization on Microstructure Evolution and Properties of Laser-Cladding Ni1.5CrFeTi2B0.5Mox High-Entropy Alloy Coatings