Abstract:The temperature evolution, stress evolution, and dendrite growth during the laser metal deposition (LMD) process of Inconel 718 alloy were simulated using a multi-scale model that combines the finite element method and the Cellular Automata (CA) method. This model established the relationship between the thermal behavior of the molten pool and the solidification characteristics, and predicted the morphological size of the solidified structure. Research indicates that under conditions of higher cooling rate and lower shape control factor, equiaxed grains are prone to form, with a lower degree of elemental segregation in this region, which is conducive to the precipitation of granular Laves phase. Conversely, under conditions of lower cooling rate and higher shape control factor, columnar grains are more likely to form, with a higher degree of elemental segregation in this region, leading to the precipitation of chain-like Laves phase. The results of thermo-mechanical coupled simulation suggest that the maximum transient thermal stress is located at the overlap position, and when the component cools down to room temperature, the maximum normal stress along the scanning direction is observed. Dendritic growth results demonstrate that during the equiaxed grain growth process in the top region of the melt pool, the released solute is constrained by time and space, leading to the accumulation of solute and the formation of interdendritic segregation. In areas with a higher grain density, the solute accumulation zones overlap, resulting in an increase in solute concentration, which inhibits dendrite growth. In the middle region of the melt pool, during the columnar grain growth process, the solute concentration in the gaps between adjacent grains continuously increases, resulting in micro-segregation phenomena. Experimental measurements have shown that the temperature field's melt pool morphology, stress values along the scanning path, and dendritic morphology are in good agreement with the experimental outcomes.

Spatial gradient prediction and characterization of yield strength in the heat-affected zone in laser-assisted machining of Inconel 718

Study on chip formation and surface integrity of nickel-based superalloy Inconel 718 by laser assisted micro-cutting

Analytical modeling of the heat-affected zone in laser-assisted milling of AerMet100 steel

Machining-Induced Work Hardening Behavior of Inconel 718 Considering Edge Geometries

Feasibility analysis and process characteristics of selective laser ablation assisted milling Inconel 718

Insight into Elongation and Strength Enhancement of Heat-Treated LPBF Ni-based Superalloy 718 Using In-Situ SEM-EBSD

Thermodynamic Behavior and Microstructure Evolution of Inconel 718 Alloy by Laser Metal Deposition

Effect of heat treatment on microstructure, precipitation behavior and mechanical properties of Inconel 718 fabricated by laser direct energy deposition

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

High‐Temperature Mechanical Behavior Assessment based on a Developed Constitutive Model of Inconel 718 Fabricated by Selective Laser Melting

Finite element analysis for residual stress of TC4/Inconel718 functionally gradient materials produced by laser additive manufacturing

Microstructure-Based Flow Stress Model to Predict Machinability of Inconel 718

Modeling and Prediction of Water-Jet-Guided Laser Cutting Depth for Inconel 718 Material Using Response Surface Methodology

Influence of pulsed laser scanning patterns on microstructural evolution and mechanical properties of Inconel 718 in direct laser deposition

Surface integrity of laser-assisted turning of the GH4169 alloy

Effect of heat treatment on microstructures and mechanical properties of Inconel 718 additively manufactured using gradient laser power

Prediction of Primary Dendrite Arm Spacing of the Inconel 718 Deposition Layer by Laser Cladding Based on a Multi-Scale Simulation

Effect of process optimization on laser additive manufacturing of Inconel 718 alloy based on finite element analysis: Thermal and structural evaluation

Microstructural characterization and fatigue performance of the recast material induced by laser manufacturing of a nickel-based superalloy

Effect of Laser Energy Density on the Microstructure and Microhardness of Inconel 718 Alloy Fabricated by Selective Laser Melting

Tailored microstructure by using in-situ re-scanning and its influence on fatigue crack growth behavior of Inconel 718 fabricated by LPBF at elevated temperature