Abstract:The use of Computational Fluid Dynamics (CFD) tools for integrated simulations of gas turbine components has emerged as a promising way to predict undesired component interactions thereby giving access to potentially better engine designs and higher efficiency. In this context, the ever-increasing computational power available. worldwide makes it possible to envision integrated massively parallel combustion chamber-turbomachinery simulations based on Large-Eddy Simulations (LES). While LES have proven their superiority for combustor simulations, few studies have employed this approach in complete turbomachinery stages. The main reason for this is the known weaknesses Of near wall flow modeling in CFD. Two approaches exist: the wall-modeled LES, where wall flow physics is modeled by a law-of-the-wall, and the wall-resolved LES where all the relevant near wall physics is to be captured by the grid leading to massive computational cost increases. This work investigates the sensitivity of wall-modeled LES of a high-pressure turbine stage. The code employed, called TurboAVBP, is an in-house LES code capable of handling turbomachinery configurations. This is possible through an LES-compatible approach with the rotor/stator interface treated based on an overset moving grids method. It is designed to avoid any interference with the numerical scheme, allow the proper representation of turbulent structures crossing it and run on massively parallel platforms. The simulations focus on the engine-representative MT1 transonic high-pressure turbine, tested by QinetiQ. To control the computational cost, the configuration employed is composed of I scaled stator section and 2 rotors. The main issues investigated are the effect of mesh resolution and the effect of sub-grid scale models in conjunction with wall modeling. The pressure profiles across the stator and rotor blades are in good agreement with the experimental data for all cases. Radial profiles at the rotor exit (in the near and far field) show improvement over RANS predictions. Unsteady flow features, inherently present in LES, are, however, found to be affected by the modeling parameters as evidenced by the obtained shock strengths and structures or turbulence content of the different simulations.

Analysis of ingress into the downstream wheel space of a 1.5-stage turbine by full circumference and single blade passage large-eddy simulations

Large Eddy Simulation and CDNS Investigation of T106C Low-Pressure Turbine

Les and Cdns Investigation of T106c Low Pressure Turbine

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Large eddy simulation of a low-pressure turbine cascade with turbulent end wall boundary layers

Large-Eddy Simulation and RANS Analysis of the End-Wall Flow in a Linear Low-Pressure Turbine Cascade, Part I: Flow and Secondary Vorticity Fields Under Varying Inlet Condition

Unsteady 3D-Numerical Investigation of the Influence of the Blading Design on the Stator-Rotor Interaction in a 2-Stage Turbine

Large Eddy Simulation of Secondary Flows in an Ultra-High Lift Low Pressure Turbine Cascade at Various Inlet Incidences

Compressible Large Eddy Simulation of a Francis Turbine During Speed-No-Load: Rotor Stator Interaction and Inception of a Vortical Flow

Shear and vortex instabilities at deep part load of hydraulic turbines and their numerical prediction

Turbulent Kinetic Energy Production in the Vane of a Low-Pressure Linear Turbine Cascade with Incoming Wakes

LARGE-EDDY SIMULATION OF TURBULENT FLOW CONSIDERING INFLOW WAKES IN A FRANCIS TURBINE BLADE PASSAGE

Vortex Cascade Features of Turbulent Flow in Hydro-Turbine Blade Passage with Complex Geometry

Turbulence Resolving Flow Simulations of a Francis Turbine in Part Load using Highly Parallel CFD Simulations

High-Fidelity Simulation Study of the Unsteady Flow Effects on High-Pressure Turbine Blade Performance

Numerical Simulation of Unsteady Flow Phenomena and Exciting Force in Control Stage of Steam Turbine under Multiple Working Conditions

Large Eddy Simulation Of A High Pressure Turbine Stage: Effects Of Sub-Grid Scale Modeling And Mesh Resolution

High-fidelity simulations of a high-pressure turbine stage: effects of Reynolds number and inlet turbulence

Cut-cell method based large-eddy simulation of tip-leakage flow

Interaction and Clocking Effect of Unsteady Flow in a One and a Half Axial-flow Turbine Stage

Investigations on the Sealing Effectiveness and Unsteady Flow Field of 1.5-Stage Turbine Rim Seal