Abstract:Roll and lateral dynamics of a vehicle are heavily coupled together, the increase of roll stability does not necessarily result in the improvement of stability in the lateral plane, but the decrease in lateral stability possibly contributes to instability in the roll plane. To address this challenge, a comprehensive tune of coupled roll and lateral dynamics for a vehicle fitted with hydraulically interconnected suspension system is presented in this paper. A typical sport utility vehicle is selected and modeled with 10 degrees of freedom to conduct the dynamic simulation. Also, the fluid equations of the proposed hydraulically interconnected suspension system with nonlinear damper model are derived and incorporated into the vehicle model. Furthermore, the integrated model is validated by the field test. The simulation is also conducted to assess and compare the vehicle roll and lateral dynamic performances under fishhook maneuver. The results show that the well-tuned hydraulically interconnected suspension can suppress its body motion in roll plane, enhance the yaw rate tracking ability, minimize the sideslip angle at the center of gravity, and also decrease the slip angles for tires. Last, the parameter sensitivity analysis for a strongly nonlinear hydraulically interconnected suspension system illustrates how individual hydraulically interconnected suspension parameters (roll stiffness, roll stiffness nonlinearity, roll stiffness distribution ratio, and damping ratio) contribute to different dynamic aspects of a vehicle. The results indicate that, by controlling hydraulically interconnected suspension key parameters, the vehicle dynamic performance can be effectively controlled in both roll and lateral planes. The parameter sensitivity analysis findings have pointed out the direction for controller design and laid the foundation for active hydraulically interconnected suspension system development in the future.

Dynamic multibody model of a turntable ladder truck considering unloaded outriggers and sensitivity-based parameter identification

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Lateral Dynamic Model for Full-Size Semi-Trailer Container Trucks with Practical Evaluation

Modeling and field-experiments identification of vertical dynamics of vehicle with active anti-roll bar

Parameter Identification of Hydraulic Manipulators Considering Physical Feasibility and Control Stability

Modeling and validation of a novel tracked robot via multibody dynamics

Parameters self‐turning controller fused with an adaptive nominal model for disturbance observer: Application to direct drive manipulator with significant payload changes

Synthetic Optimization of Trafficability and Roll Stability for Off-Road Vehicles Based on Wheel-Hub Drive Motors and Semi-Active Suspension

Dynamic modelling and experimental validation of a dynamic track stabiliser vehicle–track spatially coupling dynamics system

Development of a Multibody Dynamics Simulation Tool for Tracked Vehicles (Part I, Efficient Contact and Nonlinear Dynamic Modeling)

Analysis of the dynamic behavior of a vehicle with fully independent double-wishbone suspension and anti-roll bars

Dynamic modeling of wheeled biped robot and controller design for reducing chassis tilt angle

Dynamic modelling and stability analysis of the articulated tracked vehicle considering transient track-terrain interaction

Dynamics Modeling and Parameter Identification for a Coupled-Drive Dual-Arm Nursing Robot

A novel dynamic parameter identification method for the multi-degrees-of-freedom series direct drive manipulator

A comprehensive tune of coupled roll and lateral dynamics and parameter sensitivity study for a vehicle fitted with hydraulically interconnected suspension system

Dynamic modelling and parameter identification of a 3-DOF flight simulator platform

Sliding-mode control of gantry crane system with recursive least square parameters identification

Estimation of sideslip angle and cornering stiffness of an articulated vehicle using a constrained lateral dynamics model

Efficient and accurate flexible multibody dynamics modeling for complex spacecraft with integrated control applications

Modeling and energy-based sway reduction control for tower crane systems with double-pendulum and spherical-pendulum effects