Abstract:Roll and lateral dynamics of a vehicle are heavily coupled together, the increase of roll stability does not necessarily result in the improvement of stability in the lateral plane, but the decrease in lateral stability possibly contributes to instability in the roll plane. To address this challenge, a comprehensive tune of coupled roll and lateral dynamics for a vehicle fitted with hydraulically interconnected suspension system is presented in this paper. A typical sport utility vehicle is selected and modeled with 10 degrees of freedom to conduct the dynamic simulation. Also, the fluid equations of the proposed hydraulically interconnected suspension system with nonlinear damper model are derived and incorporated into the vehicle model. Furthermore, the integrated model is validated by the field test. The simulation is also conducted to assess and compare the vehicle roll and lateral dynamic performances under fishhook maneuver. The results show that the well-tuned hydraulically interconnected suspension can suppress its body motion in roll plane, enhance the yaw rate tracking ability, minimize the sideslip angle at the center of gravity, and also decrease the slip angles for tires. Last, the parameter sensitivity analysis for a strongly nonlinear hydraulically interconnected suspension system illustrates how individual hydraulically interconnected suspension parameters (roll stiffness, roll stiffness nonlinearity, roll stiffness distribution ratio, and damping ratio) contribute to different dynamic aspects of a vehicle. The results indicate that, by controlling hydraulically interconnected suspension key parameters, the vehicle dynamic performance can be effectively controlled in both roll and lateral planes. The parameter sensitivity analysis findings have pointed out the direction for controller design and laid the foundation for active hydraulically interconnected suspension system development in the future.

Analysis of the dynamic behavior of a vehicle with fully independent double-wishbone suspension and anti-roll bars

The Application of Sensitivity Method in Vehicle Dynamics Analysis

Modeling and field-experiments identification of vertical dynamics of vehicle with active anti-roll bar

Analysis of Vehicle Driving Stability based on Longitudinal-lateral and Vertical Unified Dynamics Model

Suspension Dynamics Simulation Based on Simulink

Passenger-Oriented Intelligent Suspension with a Biodynamic Model and Skyhook Control

Dynamic Analysis of a Planar Suspension Mechanism Based on Kinestatic Relations

Ride Comfort Analysis of Math Ride Dynamics Model of Full Tracked Vehicle with Trailing Arm Suspension

Newly Developed Nonlinear Vehicle Model for an Active Anti-roll Bar System

Nonlinear modeling of vehicle suspension system

Geometry optimization of a planar double wishbone suspension based on whole-range nonlinear dynamic model

A Generalized Method for Three-Dimensional Dynamic Analysis of a Full-Vehicle Model

Simulation Analysis of Influences of Anti-Roll Torsion Bar on Vehicle Dynamics

A comprehensive tune of coupled roll and lateral dynamics and parameter sensitivity study for a vehicle fitted with hydraulically interconnected suspension system

Study on the coordination control of active suspension employing linear motor based on co-simulation

The Concept Design and Dynamics Analysis of A Novel Vehicle Suspension Mechanism with Invariable Orientation Parameters

Modelling and Simulation Study on Application of Sliding-Mode Control for an Active Anti-Roll System in A Passenger Car with Air Suspension

Dynamic Modeling and Control of a 4-Wheel Narrow Tilting Vehicle

Vibration Analysis, Simulation and Optimization of Wishbone Type Independent Front Suspension

Rollover Preventive Force Synthesis at Active Suspensions in a Vehicle Performing a Severe Maneuver with Wheels Lifted off