Abstract:Abstract The permanent implantation of stents with and without carrying drugs led to the unresolvable long-term complications such as restenosis and thrombosis. There are increasing interests in bioresorbable stents, which have the potential to resume the vessel tone and mitigate complications. The bioresorbable stent served as a temporary scaffold for an expected period of 6 to 12 months. The design of both polymeric material and stent structure is acknowledged to impact the mechanical integrity of bioresorbable stent. Poly-l-lactide (PLLA), a polymer-based material, is the most adopted bioresorbable stent materials due to its sufficient strength and degradation resistance. The mechanical performances of the PLLA stents need to be evaluated before it is considered to serve in the clinical application. Because of difficulty and time-consuming of physical tests, finite element method (FEM) has become an efficient way to solve the problem. However, the mechanical performances of PLLA stents during the degradation process could not be fully captured using the existing numerical models. A strain-based degradation numerical model with consideration of stent-artery interaction was proposed based on the previous published experimental data. In this model, the elongation fracture of the PLLA material was correlated to the degradation degree, a scalar factor controlled by the time and local strain. The degradation evolution process was then fully captured after the stent implantation using the derived material model. With continuously loss of mass in material, the degradation rates were not uniform in different locations along the stent structure. Severe degradation was observed at the higher strain regions of the stent, which locates at the outer surface of the stent, near the crowns of the ring stent strut. At first stage of degradation, the stent strut thinning was observed in the model which was also found in the previous experimental study. At second stage of degradation, the degradation happened at the connection region between the link strut and ring struts which resulted in the break of mechanical integrity. The diameter of the vessel has minor change during the first stage of the degradation process, while at the second stage, with the breakdown of the ring structure, the vessel recoiled to its original diameter in one month time. The two-staged degradation process showed a vision for the ideal stent design. The developed computational model provided more insights into the degradation process, which could complement the discrete experimental data for improving the design and clinical management of the bioresorbable vascular scaffold.

Strength modeling for degradation of bioresorbable polyesters based on phase image pattern recognition

Effect of Nonaffine Displacement on the Mechanical Performance of Degraded PCL and Its Graphene Composites: an Atomistic Investigation

Mechanical Properties and Degradation Properties in Vitro of Carbon Fiber Reinforced Hydroxyapatite/polylactide Composite

Phase-field Modeling of Electric-Thermal Breakdown in Polymers under Alternating Voltage

An integrated mechanical degradation model to explore mechanical response of a bioresorbable polymeric scaffold

Degradation Modeling of Degradable Copolymers for Biomimetic Scaffolds

Modeling Degradation Behavior of Biodegradable Polymers for Medical Devices: A Comparative Review of Phenomenological and Stochastic Approaches

Physics and Chemistry-Based Constitutive Modeling of Photo-Oxidative Aging in Semi-Crystalline Polymers

Phase field modeling of dielectric breakdown of ferroelectric polymers subjected to mechanical and electrical loadings

Molecular dynamics simulation study of the degradation of polymer nanopatterns created by nanoimprint

Strain-Based Degradation Model With Application to Poly-L-Lactide Acid (PLLA) Artery Stent

Physics-based Constitutive Modeling of Photo-oxidative Aging in Semi-Crystalline Polymers based on Chemical Characterization Techniques

Simulation of irreversible and reversible degradation kinetics of linear polymers using sectional moment method

Effect of degradation in polymer scaffolds on mechanical properties: Surface vs. bulk erosion

Phase-field Modeling and Machine Learning of Electric-Thermal-mechanical Breakdown of Polymer-Based Dielectrics

Computational modeling of degradation process of biodegradable magnesium biomaterials

Building Ultrastrong, Tough and Biodegradable Thermoplastic Elastomers from Multiblock Copolyesters via a "Reserve‐Release" Crystallization Strategy

Robust topology optimization of biodegradable composite structures under uncertain degradation rates

Bulk Erosion Degradation Mechanism for Poly(1,8-octanediol- co-citrate) Elastomer: An In Vivo and In Vitro Investigation

Degradation mechanisms and acceleration strategies of poly (lactic acid) scaffold for bone regeneration

Formation of Mesomorphic Polymorph, Thermal-Induced Phase Transition, and Crystalline Structure-Dependent Degradable and Mechanical Properties of Poly(p-dioxanone)