Abstract:LiNi0.8Mn0.1Co0.1O2||SiOx@graphite has received great attention in both academia and industry because it has the highest energy density among state-of-the-art commercial lithium-ion batteries. However, it suffers from severe capacity decay during high-temperature cycling or storage, which still needs to be addressed for its commercialization. In this work, fluoroethylene carbonate (FEC) is employed as an additive or a cosolvent to improve the high-temperature performance of 1 Ah LiNi0.8Mn0.1Co0.1O2||SiOx@graphite pouch cells. By adding 5% FEC as additive, the capacity retention increases from 54.5% to 67.0% after 100 cycles at 45 °C. The use of FEC as a cosolvent further increases the capacity retention to 83.3%. The improvement is ascribed to the multifunctional effects from FEC, preventing electrolyte decomposition, mitigating the resistance increment and Mn ions dissolution with the formation of the interface films, which consist of LiF and LiPOxFy species. Therefore, the employment of FEC is of great importance for the development of high-energy-density lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01679?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01679</a>.(Figure S1) Cycling performance of the NMC811||SiOx@Gr pouch cells with different electrolyte systems at 0.3 C and room temperature for 100 cycles; (Figure S2) EIS of the NMC811||SiOx@Gr pouch cells after formation and 100 cycles at 0.3 C and 45 °C; (Figure S3) SEM images of the NMC811 cathodes at raw state and after 100 cycles with the blank, 5% FEC system, and 30% FEC system; (Figure S4) TEM results of the SiOx@Gr anodes after 100 cycles for the three systems and at raw state; (Figure S5) GC-MS chromatograms of the three electrolytes after formation and 100 cycles at 45 °C; (Table S1) charge/discharge capacities and Coulombic efficiency in the first formation cycle of the NMC811||SiOx@Gr pouch cells using the three electrolyte systems; (Table S2) charge/discharge specific capacities of the NMC811 electrodes using different electrolyte systems in the voltage range of 3.0–4.2 V at 0.3 C and 45 °C; (Table S3) charge/discharge specific capacities of the SiOx@Gr anodes using different electrolyte in the voltage range of 0.005–4.2 V at 0.3 C and 45 °C; (Table S4) The main electrolyte components detected from GC-MS for the three electrolyte systems after formation and 100 cycles; (Table S5) LC-QTOF-MS results collected from the electrolytes after 100 cycles; (Table S6) LC-QTOF-MS results collected from the NMC811 cathodes after 100 cycles; (Table S7) LC-QTOF-MS results collected from the SiOx@Gr anodes after 100 cycles (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01679/suppl_file/ae0c01679_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Outstanding performances of graphite||NMC622 pouch cells enabled by a non-inert diluent

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Exceptional Cycling Performance of a Graphite/li1.1ni0.25mn0.65o2 Battery at High Voltage with Ionic Liquid-Based Electrolyte

Engineering an Insoluble Cathode Electrolyte Interphase Enabling High Performance NCM811//Graphite Pouch Cell at 60 °C

Electrolyte Design for Stable Electrode-Electrolyte Interphase to Enable High-Safety and High-Voltage Batteries

Fluorinated Co‐Solvents Enable Excellent Performances of Practical Cells Comprising LixSiO‐Graphite Composite Anodes and LiNi0.89Co0.05Mn0.05Al0.01O2 (NCMA) Cathodes

Highly Fluorinated Co-Solvent Enabling Ether Electrolyte for High-Voltage Lithium Ion Batteries with Graphite Anode

Practical 4.4 V Li||NCM811 batteries enabled by a thermal stable and HF free carbonate-based electrolyte

Understanding the Outstanding High‐Voltage Performance of NCM523||Graphite Lithium Ion Cells after Elimination of Ethylene Carbonate Solvent from Conventional Electrolyte

Multifunctional Fluoroethylene Carbonate for Improving High-Temperature Performance of LiNi 0.8 Mn 0.1 Co 0.1 O 2 ||SiO x @Graphite Lithium-Ion Batteries

LiCoO2/Graphite Cells with Localized High Concentration Carbonate Electrolytes for Higher Energy Density

570 Wh Kg⁻1‐grade Lithium Metal Pouch Cell with 4.9V Highly Li+ Conductive Armor‐Like Cathode Electrolyte Interphase Via Partially Fluorinated Electrolyte Engineering

Revolutionizing multifunctional electrolyte additive design and synthesis for high-voltage nickel-rich batteries in diverse climates

Effective Stabilization of Ncm622 Cathodes in Aqueous/Non-Aqueous Hybrid Electrolytes by Adding a Phosphazene Derivate As Co-Solvent

High-Voltage Graphite//LiNi0.5Mn1.5O4 Full Cell with Bis(fluorosulfonyl)Imide and bis(trifluoromethyl)Sulfonylimide Ionic Liquid Electrolytes

Blended Salt Electrolyte Design for Enhanced NMC811||Graphite Cell Performance

A bicomponent electrolyte additive towards stabilized interface for high-performance lithium-ion batteries

Improving Cyclic Stability of LiNi0.6Co0.2Mn0.2O2-SiOx/graphite Full Cell Using Tris(trimethylsilyl)phosphite and Fluoroethylene Carbonate As Combinative Electrolyte Additive

Extending the High-Voltage Operation of Graphite/NCM811 Cells by Constructing a Robust Electrode/electrolyte Interphase Layer

Liberating the Electrolyte Via in Situ Conversion of an Amide, Sulfonate‐Containing Monomer Precursor for High‐Temperature Graphite/NCM Batteries

Fluorinated Carbonate‐Aided Ionic‐Liquid Electrolyte Enables High‐Capacity Lithium Metal Batteries