Abstract:Bulk niobium is the material mostly used in RF superconducting cavities for accelerator. Predicting and reducing the surface dissipation in RF is mandatory, since it has a tremendous cost impact on most of the large accelerator projects. The theoretical approach of superconducting radiofrequency (SRF) behavior has been far less explored than DC behavior and is still based on the description of relatively simple systems, quite remote from the realistic material in use. Nevertheless, because the actual crystalline substructure is not taken into account, it is still difficult to predict surface dissipation accurately. Moreover, Niobium with its large lambda (~40 nm), exhibit an original behavior compared to the usual superconductors used in applied superconductivity, and generalities (e.g. pinning at grain boundaries) needs to be reconsidered. In this paper we hope to demonstrate that sources of dissipation usually attributed to external causes (mainly flux trapping during cooldown and hydrides precipitates) are related to the same type of crystalline defects which are not grain boundaries; that they affect the local superconducting properties and can also be at the source of early vortex penetration at the surface. We want also to stretch out how those defects can explain some of the discrepancies observed from lab to lab on recent results obtained i.e. in doping experiments. Understanding the origin and the role of these defects could provide indications for updating specification as well as fabrication follow up. Rather than new results the author wishes to present to the superconducting accelerators community the synthesis of multiple experimental results scattered in the literature that provide a new lighting on recently published work, in particular in the domain of SRF cavity doping as well as issues such as sensitivity to trapped flux during cooldown.

Losses in superconducting Niobium Films caused by Interface Tunnel Exchange

Loss mechanisms in superconducting thin film microwave resonators

The effect of niobium thin film structure on losses in superconducting circuits

Fluxon-Induced Losses in Niobium Thin-Film Cavities Revisited

A low energy muon spin rotation and point contact tunneling study of niobium films prepared for superconducting cavities

Influence of crystalline structure on RF dissipation in Niobium: flux trapping, hydride precipitate, doping behavior...

Thickness effect on superconducting properties of niobium films for radio-frequency cavity applications

Direct Measurement of Microwave Loss in Nb Films for Superconducting Qubits

Enhanced radio-frequency performance of niobium films on copper substrates deposited by high power impulse magnetron sputtering

Sensitivity of Niobium Superconducting Cavities to Trapped Magnetic Flux Dissipation

Two different origins of the Q-slope problem in superconducting niobium film cavities for a heavy ion accelerator at CERN

On the field dependent surface resistance of niobium on copper cavities

Flux Expulsion and Material Properties of Niobium Explored in 644-650 MHz Cavities

Separation of Loss Mechanisms in Nb Superconducting Thin-Film Transmission Lines

Fabrication and surface treatment of electron-beam evaporated niobium for low-loss coplanar waveguide resonators

Simulation of Non-linear SRF losses derived from characteristic topography of etched and electropolished niobium surfaces

Effects of Interstitial Oxygen and Carbon on Niobium Superconducting Cavities

Interface-sensitive microwave loss in superconducting tantalum films sputtered on c-plane sapphire

Understanding the Mechanism of the Performance Improvement in Nitrogen-doped Niobium Superconducting Radio Frequency Cavity

Proximity breakdown of hydrides in superconducting niobium cavities