Abstract:The present study has focused on the mainstream integration of polyhydroxyalkanoate (PHA) production with industrial wastewater treatment by exploiting three different technologies all operating in sequencing batch reactors (SBR): conventional activated sludge (AS-SBR), membrane bioreactor (AS-MBR) and aerobic granular sludge (AGS). A full aerobic feast/famine strategy was adopted to obtain enrichment of biomass with PHA-storing bacteria. All the systems were operated at different organic loading (OLR) rate equal to 1-2-3 kgCOD/m<sup>3</sup>∙d in three respective experimental periods. The AS-MBR showed the better and stable carbon removal performance, whereas the effluent quality of the AS-SBR and AGS deteriorated at high OLR. Biomass enrichment with PHA-storing bacteria was successfully obtained in all the systems. The AS-MBR improved the PHA productivity with increasing OLR (max 35% w/w), whereas the AS-SBR reduced the PHA content (max 20% w/w) above an OLR threshold of 2 kgCOD/m<sup>3</sup>∙d. In contrast, in the AGS the increase of OLR resulted in a significant decrease in PHA productivity (max 14% w/w) and a concomitant increase of extracellular polymers (EPS) production (max 75% w/w). Results demonstrated that organic carbon was mainly driven towards the intracellular storage pathway in the AS-SBR (max yield 51%) and MBR (max yield 61%), whereas additional stressors in AGS (e.g., hydraulic selection pressure, shear forces) induced bacteria to channel the COD into extracellular storage compounds (max yield 50%) necessary to maintain the granule's structure. The results of the present study indicated that full-aerobic feast/famine strategy was more suitable for flocculent sludge-based technologies, although biofilm-like systems could open new scenarios for other biopolymers recovery (e.g., EPS). Moreover, the AS-MBR resulted the most suitable technology for the integration of PHA production in a mainstream industrial wastewater treatment plant, considering the greater process stability and the potential reclamation of the treated wastewater.

Effect of culture history and carbon sources on polyhydroxyalkanoates production in activated sludge systems

Coupling of Polyhydroxyalkanoate Production with Volatile Fatty Acid from Food Wastes and Excess Sludge

Production of polyhydroxyalkanoates by activated sludge: Correlation with extracellular polymeric substances and characteristics of activated sludge

Process conditions affect properties and outcomes of polyhydroxyalkanoate accumulation in municipal activated sludge

PHA and EPS production from industrial wastewater by conventional activated sludge, membrane bioreactor and aerobic granular sludge technologies: A comprehensive comparison

Production of polyhydroxyalkanoates (PHA) by activated sludge treating municipal wastewater: effect of pH, sludge retention time (SRT), and acetate concentration in influent

Polyhydroxyalkanoate production from fermented volatile fatty acids: effect of pH and feeding regimes.

Polyhydroxyalkanoate (PHA) production in open mixed cultures using waste activated sludge as biomass

Polyhydroxyalkanoates production from a waste-derived feedstock driven by the reactor operating conditions: The role of biomass microbiome and its reactivation capacity

An assessment of the potential of a single anaerobic/aerobic/anoxic airlift bioreactor for PHA production: effect of different wastewaters

Effect of enrichment conditions of secondary feeding on the synthesis of polyhydroxyalkanoates (PHAs) by activated sludge

Consistent production of high quality PHA using activated sludge harvested from full scale municipal wastewater treatment - PHARIO

Optimization of an enriched mixed culture to increase PHA accumulation using industrial saline complex wastewater as a substrate

Effect of nitrogen limitation on enrichment of activated sludge for PHA production

Effect of acetate concentration, temperature, pH and nutrient concentration on polyhydroxyalkanoates (PHA) production by glycogen accumulating organisms

Exploring the Limits of Polyhydroxyalkanoate Production by Municipal Activated Sludge

Polyhydroxyalkanoate production using two‐stage continuous stirred tank activated sludge systems with glycerol as a carbon source

Impact of phosphorus limitation on medium-chain-length polyhydroxyalkanoate production by activated sludge

Visualization of Polyhydroxyalkanoate Accumulated in Waste Activated Sludge

Enhanced polyhydroxyalkanoate (PHA) production from the organic fraction of municipal solid waste by using mixed microbial culture

Effect of composition of volatile fatty acids on yield of polyhydroxyalkanoates and mechanisms of bioconversion from activated sludge