Abstract:In order to overcome problems of Au-Cu bimetallic catalysts for acetylene hydrochlorination reaction such as instability, Au-Cu-SH/AC catalysts were prepared through the introduction of thiol and tested to examine their activity and stability. It was found that performances of Au-Cu-SH/AC catalysts were quite excellent, with significantly higher catalytic activity and better stability than performances of Au/AC and Au-Cu/AC catalysts. The contents of Cu and thiol additives were also optimized and the optimum molar ratio of Au/Cu/SH was 1 : 1 : 10. Catalyst samples were characterized by scanning electron microscopy (SEM), nitrogen adsorption/desorption (BET), X-ray diffraction (XRD), transmission electronic microscopy (TEM), H-2 temperature-programmed reduction (H-2-TPR), and X-ray photoelectron spectroscopy (XPS). It was demonstrated that the Au-Cu-SH/AC catalysts were Au-0-based catalysts, due to thiol reducing Au3+ to Au-0 species during the preparation process. Au-0 species exhibited better catalytic activity than Au3+ species for acetylene hydrochlorination, according to the comparison with the composition of active species in different samples through XPS. Furthermore, the sulfhydryl of thiol could bond to the surface of gold nanoparticles (Au NPs). It helped in mitigating the oxidation of Au-0 by HCl, protecting Au NPs from structure damage, stabilizing Au NPs in a nearly constant particle size and keeping a more active structure in the reaction environment. Thus, improved dispersity of active species and protection of the active structure of the Au NPs resulted in the better catalytic activity and stability of Au-Cu-SH/AC.

Effect of the acid used in the evaporation-induced self-assembly method on Ce–Cu–Al trimetallic composite catalyst for its simultaneous removal of H 2 S and PH 3

Influence of drying and calcination temperatures for Ce-Cu-Al trimetallic composite catalyst on simultaneous removal H2S and PH3: Experimental and DFT studies

Improvement of performance of a Au–Cu/AC catalyst using thiol for acetylene hydrochlorination reaction

Spatially Asymmetrical Copper Dimer in Ceria As an Efficiently Synergistic Oxidation Catalyst

Promoting effect of an aluminum emulsion on catalytic performance of Cu-based catalysts for methanol synthesis from syngas

Study on Catalytic Oxidation of Oleic Acid by Ce-SBA-15 Modified Molecular Sieve

Synthesis, characterization and evaluation of Cu/MgAlFe as novel transfer catalyst for SOx removal

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Effect of CeO2 nanoparticle sizes on catalytic performances of sulfated CeO2/Al2O3 catalyst in NH3-SCR reaction

Promotional effect of Ce in NH3-SCO and NH3-SCR reactions over Cu-Ce/SCR catalysts

Revealing the structural evolution of CuAg composites during electrochemical carbon monoxide reduction

Investigation on Cu Promotion Effect on Ce-based Solid Solution-Anchored Rh Single Atoms for Three-Way Catalysis

Effect of Ion-Exchange Sequences on Catalytic Performance of Cerium-Modified Cu-SSZ-13 Catalysts for NH3-SCR

Effect of acid/alkali treatment on the structure and catalytic performance of 3DOM CeCo0.7Mn0.3O3 catalyst

Preparation and properties of cerium modified Cu based catalysts for methanol synthesis

Effect of Ce Modification on the Performance of CuLDH Catalyst for CO2 Hydrogenation to Methanol

A basic comprehensive study on synergetic effects among the metal oxides in CeO2-WO3/TiO2 NH3-SCR catalyst

Positive Effect of Ce Modification on Low-Temperature NH3-SCR Performance and Hydrothermal Stability over Cu-SSZ-16 Catalysts

Effect of preparation methods of aluminum emulsions on catalytic performance of copper-based catalysts for methanol synthesis from syngas

Enhancing the activity and sulfur resistance of CuFeAlO x catalyst via the structure effect for the simultaneous removal of Hg 0 and NO at wide temperature

Selenic Acid Etching Assisted Atomic Engineering for Designing Metal-Semimetal Dual Single-Atom Catalysts for Enhanced CO 2 Electroreduction