Abstract:Hybrid joints combining pre-tensioned bolts and adhesive bonding have been shown to have the potential to increase joint loading capacity for steel structures. In this paper, experimental and numerical research on hybrid joints has been reviewed with a focus on load transfer mechanisms. However, there is still no clear consensus on whether hybrid joints are an extension of a pre-tensioned bolted connection with an increased friction coefficient or adhesively bonded ones. This is due to the complexity of hybrid joints, which require knowledge from two different fields of engineering and can result in incomplete characterisation of adhesives and documentation of manufacturing and testing large-scale samples. The first part of the review paper discusses the experimental evidence gathered on small-scale samples (Napkin and off-axis tests), although not strictly resulting from observations directly made on hybrid joints. The authors that studied the σ - τ –interaction on both tensile and compressive normal stresses provided evidence of a clear distinction to be made between tensile and compressive normal stresses. For tensile normal stresses, there is a clear lower limit below which no shear strength exists, while compressive stresses significantly increase shear strength. However, there is no clear consensus regarding the exact nature of the interaction between compressive normal stresses and shear strength. Some authors assume a linear relationship involving some cohesive strength, while others identified bi-linear or more complex relationships. Adhesives do not exhibit any noteworthy differences in the friction coefficient, and differences related to the failure mode were identified: cohesive failure is likely driven by the intrinsic strength of the adhesive, while adhesive failure can be modelled as a classic friction problem. Relating the aforesaid to the adhesive, or specific properties thereof, proved difficult, as most of the studies do not provide sufficient information. Additional complexity arises if tests are carried out on galvanised or coated surfaces, in which case the performance of the adhesive may be subordinated to that of the specific steel surface. Overall, the review paper provides valuable insights into the load transfer mechanisms of hybrid joints, but further research is necessary to fully understand their behaviour and to optimise their design for use in steel structures.

Failure mechanisms in pre-tensioned bonded hybrid joints

Hybrid joints consisting of pre-tensioned bolts and a bonded connection—A comprehensive review part I: Local approach

Experimental Investigation and Numerical Simulation of Bonded, Bolted, and Hybrid Joints in CFRP Laminates Under Tensile Loading

The Tensile Behavior of Hybrid Bonded Bolted Composite Joints: 3D-Digital Image Correlation versus Finite Element Analysis

Fatigue and Tensile Behaviors of High Stiffness Adhesive Bonded and Hybrid Joints with Composite-Steel Dissimilar Materials

Multiaxial stress effects on bonding strength in adhesively bonded joints

A Finite Element Model for Predicting the Static Strength of a Composite Hybrid Joint with Reinforcement Pins

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Mechanical properties of all-C/C composite hybrid bonded/bolted joints

Numerical and experimental investigation on the load‐bearing performance of plain‐woven composites hybrid bonded‐bolted joints

Experimental study of bonded, bolted, and hybrid bonded-bolted single lap shear joints with woven CFRP adherends

Experiment and simulation study on bonded, bolted and hybrid bolted/bonded joints of textile CFRP using bimodulus constitutive model

Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading

Parametric study on the load-carrying capacity of plain-woven composites hybrid bonded-bolted joints

Mechanical Properties and Failure Characteristics of Hybrid Bonded-Bolted GFRP/Al Joints under Dynamic Tensile load

The evolution mechanisms of bearing-tension-shear failure modes of FML joints under in-plane dynamic load

Modelling the static and fatigue behavior of hybrid spot welded-adhesively bonded single lap joints

Experimental study of bonded, bolted, and hybrid braided CFRP joints with different stacking sequences and lapping patterns

Predicting the Adhesive Layer Thickness in Hybrid Joints Involving Pre-Tensioned Bolts

Experimental and Numerical Investigations on the Hybrid Dowel and Bonding Steel Plate Joints for Timber Structures

Characterization of damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates