Abstract:Track structures are apt to generate degradation under repeated loading of train traffic. Avariation of support stiffness is one of the main degradations, such as unsupported sleepers and the transition position from embankment to a bridge, which occurred frequently. The service performance of track will decline including the comfort index of passengers and the safety of train in these areas. In order to understand the control standard of track stiffness variation, various models have been used to analyze the amplification of dynamic responses of track by researchers. The coupling effect of train and track structure was considered unnegligible in some researches. In this paper, an updated numerical model is developed based on track dynamic theory, in which the CA mortar and concrete base are both taken into consideration. The results were compared with the finite element model ( FEM) results based on ABAQUS software, in which the train loads are assumed as a series of constant loads. From the comparison, the influence of train-track interaction was presented. When the track has no irregularity or degradation, the wheel-rail contact loads are nearly constant, and the dynamic responses of track structure are the same in these two models. But if there are track stiffness variations,the results in train-track interaction model are larger than that in FEM,which means that the train-track interaction has an intensive effect. Besides the differences of track responses, the FEM cannot reveal the variation of contact forces and train responses, which are also essential to summarize the control standard of track degradation. At last, based on the train-track interaction model, various conditions of track stiffness variation are analyzed and discussed.

The Strength Analysis of a Bus Superstructure Based on the Accuracy Improvement of T-Junction Flexible Joint Stiffness

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Theoretical Analysis and Experimental Study on Sensitivity of Element-Length Error in Cable-Strut Tensile Structures

STUDY OF THE STRESS DISTRIBUTION AND MECHANICAL PROPERTIES OF THE BEAM-COLUMN JOINT IN STEEL ROOF TRUSS BASED ON FULL-SCALE TESTS

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

An Improved Numerical Model for Locomotive Tensegrity Systems Based on Vector Form Intrinsic Finite Element

Finite Element Analysis and Light Weight Design for Bus Structure

Finite Element Analysis and Light Weight Design of a Fuel Cell City Bus Structure

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Multi-objective Optimization on Bus Structure based on Optimized Stress

STRESS ANALYSIS OF SUSPENSION BRACKETS ON A 12-METER ELECTRIC BUS USING THE FINITE ELEMENT METHOD

Comparison of FEA for Beam and Shell Element Models of Integral Bus Body Frame

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Optimization of bus frame with bending moment and torsion constraints using finite element method

Rollover crashworthiness analysis and optimization of bus frame for conceptual design

Variable Cross-Section Rectangular Beam and Sensitivity Analysis for Lightweight Design of Bus Frame

Multi-objective Optimization on the Body Structure of Integral Bus

Design and optimization of electric bus monocoque structure consisting of composite materials

Stiffness analysis of automobile aluminium alloy frame based on finite element model

Finite Element Analysis in Automobile Chassis Design

The Finite Element Analysis of a Minibus's BIW