Abstract:Track structures are apt to generate degradation under repeated loading of train traffic. Avariation of support stiffness is one of the main degradations, such as unsupported sleepers and the transition position from embankment to a bridge, which occurred frequently. The service performance of track will decline including the comfort index of passengers and the safety of train in these areas. In order to understand the control standard of track stiffness variation, various models have been used to analyze the amplification of dynamic responses of track by researchers. The coupling effect of train and track structure was considered unnegligible in some researches. In this paper, an updated numerical model is developed based on track dynamic theory, in which the CA mortar and concrete base are both taken into consideration. The results were compared with the finite element model ( FEM) results based on ABAQUS software, in which the train loads are assumed as a series of constant loads. From the comparison, the influence of train-track interaction was presented. When the track has no irregularity or degradation, the wheel-rail contact loads are nearly constant, and the dynamic responses of track structure are the same in these two models. But if there are track stiffness variations,the results in train-track interaction model are larger than that in FEM,which means that the train-track interaction has an intensive effect. Besides the differences of track responses, the FEM cannot reveal the variation of contact forces and train responses, which are also essential to summarize the control standard of track degradation. At last, based on the train-track interaction model, various conditions of track stiffness variation are analyzed and discussed.

An Improved Numerical Model for Locomotive Tensegrity Systems Based on Vector Form Intrinsic Finite Element

Rolling Gaits of a Strut-Actuated Six-Strut Spherical Tensegrity

Robustness Evaluation for Rolling Gaits of a Six-Strut Tensegrity Robot

An Improved Dog-Leg Method for Form-Finding of Tensegrity Structures

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Numerical Modeling of Force-Stiffness Response of Cross-Linked Actin Networks Using Tensegrity Systems

Modeling and Rolling Gaits of a Strut-Actuated 6-Strut Locomotive Tensegrity Robot with Membranes

Vector form intrinsic finite element analysis based on fine beam model

Nonlinear active control of tensegrity structures

Form-Finding and Evaluation of Spherical Tensegrity Toward Applying in Locomotive Robots

Motion Behavior of a 30-Strut Locomotive Tensegrity Robot

A General Model for Both Shape Control and Locomotion Control of Tensegrity Systems

Virtual design of rigidity for valve train system in internal combustion engine

Modeling of a Six-Bar Tensegrity Robot Using the Port-Hamiltonian Framework and Experimental Validation

Dynamic research on winding and capturing of tensegrity flexible manipulator

Efficient Model Identification for Tensegrity Locomotion

Geometric Static Modeling Framework for Piecewise-Continuous Curved-Link Multi Point-of-Contact Tensegrity Robots

A unified framework for mechanical modeling and control of tensegrity robots

Geometric constraint-based modeling and analysis of a novel continuum robot with Shape Memory Alloy initiated variable stiffness

Comparison of Modeling Approaches for a Tendon Actuated Continuum Robot With Three Extensible Segments

An efficient locomotion strategy for six-strut tensegrity robots