Abstract:For greater productivity, oil and gas are increasingly being transported at higher pressures through steel pipelines, which has necessitated the development of thick-gauge high-strength–high-toughness line pipe steels. In this work, the microstructural evolution of a 22-mm-thick Nb and Ti microalloyed API Grade X70 line pipe steel subjected to thermomechanical processing is investigated. The microstructure of the steel sample was analyzed using advanced characterization techniques to glean insight into microstructure and texture. The surface of the plate consisted of a relatively higher fraction of polygonal ferrite, whereas the plate interior possessed a higher fraction of non-polygonal ferritic structure. The grain size was found to increase from the surface to the center of the plate. The presence of a higher fraction of secondary phases, such as degenerated pearlite (DP) and martensite austenite (MA) constituents, was observed toward the core of the plate. The major texture components ({001} , {113} , and {332} ) were found to be present through the thickness. However, their intensity increased toward the core of the plate. Higher intensity of {113} toward the core of the plate may cause a higher degree of anisotropy of mechanical properties than the surface of the plate. The detrimental impact of {001} texture on fracture may get counterbalanced by the beneficial impact of {113} texture on toughness. A high fraction of composite coarse precipitates ((Nb,Ti)CN type) in the outer part of the plate may contribute to an increase in grain refinement in the final microstructure during the processing of the plate. In contrast, a high fraction of fine precipitates (<20 nm) observed in the ferrite matrix at the core may contribute to a higher ductile-brittle transition temperature. An in-depth understanding of microstructure will allow its correlation with the mechanical properties needed for thick gauge pipelines with higher transmission rates.

Development of High Strength and High Performance Linepipe and Shipbuilding Steels

Development and Production of Ultra-High Strength Linepipes With Dual-Phase Microstructure for High Strain Application

Strain-hardening Behavior of High Grade Linepipe Steel and Its Influence Factors

Strain-Hardening Properties of High Grade Line Pipes

Experimental Research and Manufacturing Technology of Heavy Gauge WPHY-80 Pipe Fitting Plate with Uniform Microstructure

The Microstructure and Mechanical Property of X70, X80 and X100 Grade Pipeline Steel

TMCP of E/F grade high-strength ship plates in Shougang Co.

Influence of Thermal Aging on Microstructure and Mechanical Behavior of X100 High Deformability Line Pipe

Studying the Microstructural Evolution in a Hot-Rolled Thick Gauge Microalloyed Line Pipe Steel

New Trends in Advanced High Strength Steel Developments for Automotive Application

Strength, Strain Capacity and Toughness of Five Dual-Phase Pipeline Steels

Performance Study of Copper-Bearing High Strength Ship-Hull Steel

Microstructure and properties of X100 large-deformability pipeline steel based on heating on-line partitioning

Yield Strength Development from High Strength Steel Plate to UOE Pipe

Changes in microstructure and properties of weld heat-affected zone of high-strength low-alloy steel

Production Of Grade X80 High Strain Linepipes For Seismic Region Application

Comparison of Microstructure and Mechanical Properties of High Strength and Toughness Ship Plate Steel

The Effect of Microstructure on Properties of High Deformation Pipeline Steel X70

Effect of Hydrogen on Tensile Properties and Fracture Behavior of Two High-Strength American Petroleum Institute Linepipe Steels

Effect of strain aging on properties of X90 line pipe

Microstructure Characterization and Strengthening Mechanism Analysis of X100 Pipeline Steel