Abstract:This paper presents the microfabrication and performance of a three-dimensional electrospray ionization (ESI) emitter tip made from glass, which achieves stable current signals important for chemical analysis. Our novel microfabrication process and custom-built signal conditioning hardware provides the advantage of providing accurate features and steady signals. The fabrication process relies on standard microfabrication techniques (i.e., deposition, photolithography, and wet etching). This fabrication method involves the novel application of two layers of positive and negative photoresists in addition to Parafilm® wax tape. Open edge and tiered depth details were successfully created from a multilayer planar mask. This is a benefit for integrated miniaturized and microfluidic systems that often require micro features for their functionality but relatively large millimeter size features for their physical periphery. We demonstrate the fundamental performance of electrospray with this microfluidic chip. The emitter tip was fixed on a linear axis stage with high resolution (10 μm) to finely control the tip distance from a metal counter electrode plate. A custom printed circuit board system was built to safely control four voltages applied to the microchip ports from a single high voltage power supply. To readily form the electrospray, non-aqueous solvents were used for their low viscosity and a constant voltage of +2.7 kV was applied to the sheath electrospray microchannel. The liquid being sprayed was 80/20 (v/v) methanol/acetonitrile with 0.1% acetic acid in the sheath microchannel and with ammonium acetate (10-40 mM) in its remaining microchannels. The electrospray signal was measured in response to varying the distance (1.4 to 1.6 mm) between the electrospray emitter tip and a metal counter electrode plate in addition to the varying concentration of the background electrolyte, ammonium acetate. Stable and repeatable electrospray signal showed linear relationships with emitter tip distance and concentration (r2≥0.95).

High-Performance, Low-Cost, Additively Manufactured Electrospray Ion Sources for Mass Spectrometry

A 3D-Printed Sub-Atmospheric Pressure Electrospray Ionization Source for Robust, Facile, and Flexible Mass Spectrometry Analysis.

A Microfluidic-Fabricated Rod Sprayer for Nanoelectrospray Mass Spectrometry.

Multinozzle emitter arrays for nanoelectrospray mass spectrometry.

MS SIEVE -Pushing the Limits for Biomolecular Mass Spectrometry

Unlocking the potential of 3D printed microfluidics for mass spectrometry analysis using liquid infused surfaces

3D-Printing Advances Mass Spectrometry in Biomedical Analysis

Electrokinetic Manipulations Combined With Direct and Ambient Ionization Mass Spectrometry

Electroless Ionization Mass Spectrometry Using a Compact Electrokinetic Ionization Source

3D Printed Coated Blade Spray-Mass Spectrometry Devices

Stable electrospray signal on a microfabricated glass chip with three-dimensional open edge and tiered depth geometries

High-Throughput and Direct Sample Screening Using a Laser Spray Ionization Miniature Mass Spectrometer

Exploiting the Native Inspiratory Ability of a Mass Spectrometer to Improve Analysis Efficiency

A MICROFLUIDIC CHIP BASED ELECTROS- PRAY INTERFACE FOR MASS SPECTROMETRY WITH A LOW-TEMPERATURE ALLOY MICRO- ELECTRODE

Gold-Coated Nanoelectrospray Emitters Fabricated by Gravity-Assisted Etching Self-Termination and Electroless Deposition

Direct Surface and Droplet Microsampling for Electrospray Ionization Mass Spectrometry Analysis with an Integrated Dual-Probe Microfluidic Chip.

About the Electrospray Ionization Source in Mass Spectrometry: Electrochemistry and On-chip Reactions

Accelerated Air-Assisted In-Syringe Extraction and Needle Spray Ionization Coupled with Miniature Mass Spectrometry: A Streamlined Platform for Rapid On-Site Analysis.

Assembly of Droplet Reinjection-MS Interfaces: Overcoming Droplet Coalescence for High Throughput Screening Applications.

Pocket-Size Wireless Nanoelectrospray Ionization Mass Spectrometry for Metabolic Analysis of Salty Biofluids and Single Cells

Three-Dimensional Electro-Sonic Flow Focusing Ionization Microfluidic Chip For Mass Spectrometry