Abstract:Rationale: Molecular imaging of samples using mass spectrometric techniques, such as matrix-assisted laser desorption ionization or desorption electrospray ionization, requires the sample surface to be even/flat and sliced into thin sections (c. 10 μm). Furthermore, sample preparation steps can alter the analyte composition of the sample. The liquid microjunction-surface sampling probe (LMJ-SSP) is a robust sampling interface that enables surface profiling with minimal sample preparation. In conjunction with a conductance feedback system, the LMJ-SSP can be used to automatically sample uneven specimens. Methods: A sampling stage was built with a modified 3D printer where the LMJ-SSP is attached to the printing head. This setup can scan across flat and even surfaces in a predefined pattern ("static sampling mode"). Uneven samples are automatically probed in "conductance sampling mode" where an electric potential is applied and measured at the probe. When the probe contacts the electrically grounded sample, the potential at the probe drops, which is used as a feedback signal to determine the optimal position of the probe for sampling each location. Results: The applicability of the probe/sensing system was demonstrated by first examining the strawberry tissue using the "static sampling mode." Second, porcine tissue samples were profiled using the "conductance sampling mode." With minimal sample preparation, an area of 11 × 15 mm was profiled in less than 2 h. From the obtained results, adipose areas could be distinguished from non-adipose parts. The versatility of the approach was further demonstrated by directly sampling the bacteria colonies on agar and resected human kidney (intratumoral hemorrhage) specimens with thicknesses ranging from 1 to 4 mm. Conclusion: The LMJ-SSP in conjunction with a conductive feedback system is a powerful tool that allows for fast, reproducible, and automated assessment of uneven surfaces with minimal sample preparation. This setup could be used for perioperative assessment of tissue samples, food screening, and natural product discovery, among others.

3D Printed Coated Blade Spray-Mass Spectrometry Devices

Coated Blade Spray Ion Mobility Spectrometry

3D-Printing Advances Mass Spectrometry in Biomedical Analysis

Understanding the effect of spatial positioning of coated blade spray devices relative to the mass spectrometry inlet on different instrument platforms and its application to quantitative analysis of fentanyl and related analogs

High-Performance, Low-Cost, Additively Manufactured Electrospray Ion Sources for Mass Spectrometry

Unlocking the potential of 3D printed microfluidics for mass spectrometry analysis using liquid infused surfaces

Accelerated Air-Assisted In-Syringe Extraction and Needle Spray Ionization Coupled with Miniature Mass Spectrometry: A Streamlined Platform for Rapid On-Site Analysis.

OpenASAP: An affordable 3D printed atmospheric solids analysis probe (ASAP) mass spectrometry system for direct analysis of solid and liquid samples

A Small Footprint and Robust Interface for Solid Phase Microextraction and Mass Spectrometry Based on Vibrating Sharp-Edge Spray Ionization

High-Throughput and Direct Sample Screening Using a Laser Spray Ionization Miniature Mass Spectrometer

Real-time Sample Analysis Using a Sampling Probe and Miniature Mass Spectrometer.

Sub-ppt Mass Spectrometric Detection of Therapeutic Drugs in Complex Biological Matrixes Using Polystyrene-Microsphere-Coated Paper Spray.

A 3D-Printed Sub-Atmospheric Pressure Electrospray Ionization Source for Robust, Facile, and Flexible Mass Spectrometry Analysis.

3D printer platform and conductance feedback loop for automated imaging of uneven surfaces by liquid microjunction-surface sampling probe mass spectrometry

Development and Functionalization of Electrospun Fiber Coated Thin Film Microextraction Devices for Rapid Mass Spectrometric Determination of Biologically Important Polar Molecules

Challenges and Strategies of Chemical Analysis of Drugs of Abuse and Explosives by Mass Spectrometry

Handheld Mass Spectrometer with Intelligent Adaptability for On-Site and Point-of-Care Analysis

Advancing mass spectrometry-based chemical imaging: A noncontact continuous flow surface probe in mass spectrometry for enhanced signal detection and spatial resolution

A dielectric barrier discharge ionization based interface for online coupling surface plasmon resonance with mass spectrometry.

Novel electrospun-based extractive probes for rapid determination of clinically important compounds in human plasma

Portable Miniature Mass Spectrometry for Enhanced On-Site Detection of Analytes in Complex Samples by Integrating Solid-Phase Microextraction and Nano-Electrospray Ionization