Abstract:In this paper, a glass microchip-based emitter with a low-melting-point alloy (LMA) microelectrode and a monolithic tip for electrospray ionization mass spectrometry (ESI-MS) was described. So far, the fabrication of metal microelectrode achieving direct electrical contact in the microchannel of glass chip is still a challenge. A novel fabrication approach for LMA microelectrode in the glass chip was developed to achieve direct electrode-solution electrical contact in the microchannel. An electrode channel and a sample channel were firstly fabricated on a glass chip with a micropore connecting the two channels. The melted LMA was filled into the electrode channel under a pressure of ca. 100 kPa, forming a stable and nicely fitted interface at the micropore between the sample and the electrode channels due to surface tension effect. The melted LMA filled in the electrode channel was then allowed to solidify at room temperature. The channel geometries including the distance between the sample and the electrode channels on the mask and the turning angle of the electrode channel were optimized for fabricating the LMA electrode. In this work, an improved fabrication approach for monolithic emitter tip based on pyramid-shaped Ill) configuration and stepped grinding method was also developed to fabricate well-defined sharp tips with a smallest tip end size of ca. 15 mu m x 50 mu m. Two types of emitter tip end including puncher-shaped tip and fork-shaped tip were produced. The emitter with the fork-shaped tip showed better working stability (4.4% RSD, TIC) at nanoliter-scale flow rate of 50 nL/min. The fabrication approaches for the LMA microelectrode and emitter tip are simple and robust, and could be carried out in most of routine laboratories without the need of complicated and expensive instruments. The performance of the emitter was evaluated in the analysis of reserpine, angiotensin II and myoglobin. A continuous experiment over 6h demonstrated good stability of the present system in long-term analysis. (C) 2010 Elsevier B.V. All rights reserved.

A MICROFLUIDIC CHIP BASED ELECTROS- PRAY INTERFACE FOR MASS SPECTROMETRY WITH A LOW-TEMPERATURE ALLOY MICRO- ELECTRODE

Fabrication Of Low-Melting-Point Alloy Microelectrode And Monolithic Spray Tip For Integration Of Glass Chip With Electrospray Ionization Mass Spectrometry

Stable electrospray signal on a microfabricated glass chip with three-dimensional open edge and tiered depth geometries

Fabrication of a polystyrene microfluidic chip coupled to electrospray ionization mass spectrometry for protein analysis.

Droplet analysis with electrospray ionization mass spec-trometry using an integrated glass microchip

Direct Surface and Droplet Microsampling for Electrospray Ionization Mass Spectrometry Analysis with an Integrated Dual-Probe Microfluidic Chip.

Chip-CE/MS using a flat low-sheath-flow interface

A Reliable And Simple Method For Fabricating A Poly(Dimethylsiloxane) Electrospray Ionization Chip With A Corner-Integrated Emitter

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

Fabricating And Characterizing The Microfluidic Solid Phase Extraction Module Coupling With Integrated Esi Emitters

Fabricating an Electrospray Ionization Chip Based on Induced Polarization and Liquid Splitting

On-Chip Spyhole Nanoelectrospray Ionization Mass Spectrometry for Sensitive Biomarker Detection in Small Volumes

A multifunctional microfluidic droplet-array chip for analysis by electrospray ionization mass spectrometry.

Miniaturized nanoelectrospray interface for coupling capillary electrophoresis with mass spectrometry detection

Three-Dimensional Electro-Sonic Flow Focusing Ionization Microfluidic Chip For Mass Spectrometry

Integrated droplet analysis system with electrospray ionization-mass spectrometry using a hydrophilic tongue-based droplet extraction interface.

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Microfluidic self-aspiration sonic-spray ionization chip with single and dual ionization channels for mass spectrometry

A demountable nanoflow nebulizer for sheathless interfacing nano-high performance liquid chromatography with inductively coupled plasma mass spectrometry

A microfluidic system for introduction of nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow

Interfacing Monolith-Based Electrochromatography in Microchips with Inductively Coupled Plasma Mass Spectrometry for Elemental Speciation