Abstract:RATIONALE: The flow rate match has been a great challenge when coupling capillary electrophoresis (CE) with electrospray ionization mass spectrometry (ESI-MS). Conventional CE-ESI-MS interfaces used liquid sheath flow, narrowed capillary or additional pressure to meet this requirement; sacrifice of either capillary inner diameter (i.d.) or separation efficiency is often inevitable. Thus, a regular-sized capillary-based sheathless interface would be attractive for flow rate match in CE-MS.METHODS: The regular-sized capillary-based CE-MS interface was achieved by coupling CE with induced electrospray ionization (iESI) which was stimulated by the fact that the iESI could both achieve flow rate down to 0.2 mu L/min and retain ionization efficiency. The CE-iESI-MS interface was completed with an intact separation capillary, outside the outlet end of which a metal electrode was attached for the application of alternating current (ac) high voltage (HV).RESULTS: The feasibility of this CE-iESI-MS interface was demonstrated through the stable total ion chromatograms obtained by continuous CE infusion of tripropylamine with regular-sized capillaries. Tripropylamine and atenolol were separated and detected successfully in phosphate buffer solution (PBS) by CE-iESI-MS using a 50 or 75 mu m i.d. capillary. Furthermore, this new interface showed a better signal-to-noise (S/N) of 3 to 7 times enhancement compared with another sheathless CE-ESI-MS interface that using one high voltage for both separation and electrospray when analyzing the mixture of tripropylamine and proline in NH4OAc buffer. In addition, the reproducibility of this interface gave satisfactory results with relative standard deviation (RSD) in retention time in the range between 1% and 3%.CONCLUSIONS: The novel sheathless CE-MS interface introduced here could match conventional electroosmotic flow (EOF) with electrospray which could also preserve the separation efficiency and sensitivity of CE-MS. This newly developed CE-iESI-MS interface was also demonstrated to be effective for different buffers, PBS and NH4OAc, without any additives such as methanol and acetic acid. Hence, we believe that this sheathless CE-MS interface could be operated with other nonvolatile and volatile buffers. Copyright (C) 2016 John Wiley & Sons, Ltd.

Chip-CE/MS using a flat low-sheath-flow interface

A Robust and Extendable Sheath Flow Interface with Minimal Dead Volume for Coupling CE with ESI-MS

A Sheath-Flow Nanospray Interface for Capillary Electrophoresis/mass Spectrometry.

A MICROFLUIDIC CHIP BASED ELECTROS- PRAY INTERFACE FOR MASS SPECTROMETRY WITH A LOW-TEMPERATURE ALLOY MICRO- ELECTRODE

Sheathless Interface to Match Flow Rate of Capillary Electrophoresis with Electrospray Mass Spectrometry Using Regular-Sized Capillary

Integration of Microfabricated Devices to Capillary Electrophoresis-Electrospray Mass Spectrometry Using a Low Dead Volume Connection: Application to Rapid Analyses of Proteolytic Digests.

A Gold Foil Covered Fused Silica Capillary Tip As a Sheathless Interface for Coupling Capillary Electrophoresis-Mass Spectrometry

Nanoliter-Scale Etched Capillary Electrospray Interface of Mass Spectrometry

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

A robust polymetallic-coated sheathless interface with high acid and alkali resistance for coupling capillary electrophoresis with mass spectrometry

A Reliable And Simple Method For Fabricating A Poly(Dimethylsiloxane) Electrospray Ionization Chip With A Corner-Integrated Emitter

Facile fabrication of an interface for online coupling of microchip CE to surface plasmon resonance

Fabricating And Characterizing The Microfluidic Solid Phase Extraction Module Coupling With Integrated Esi Emitters

A demountable nanoflow nebulizer for sheathless interfacing nano-high performance liquid chromatography with inductively coupled plasma mass spectrometry

A Pressure-Driven Capillary Electrophoretic System with Injection Valve Sampling.

Fabrication Of Low-Melting-Point Alloy Microelectrode And Monolithic Spray Tip For Integration Of Glass Chip With Electrospray Ionization Mass Spectrometry

Development and Application of Capillary Electrophoresis-Electrospray Ionization Mass Spectrometry System Based on A Coaxial Sheath Flow Interface

Study of the Electrical Connection Mechanism of Sheathless Interface for Capillary Electrophoresis-Electrospray Ionization-Mass Spectrometry

An Integrated Plastic Microchip for Enhancing Electrophoretic Separation Using Tunable Pressure-Driven Backflows.

Microfluidic Flow-through SPME Chip for Online Separation and MS Detection of Multiple Analyses in Complex Matrix

Fabrication of a Monolithic Sampling Probe System for Automated and Continuous Sample Introduction in Microchip‐based CE