Abstract:As a potential substitute for commercial lithium ion batteries (LIBs), sodium ion batteries (NIBs) have attracted increasing interest during the last decade. However, compared to the LIBs, the sluggish kinetics of sodium ion diffusion in NIBs due to its larger ionic radius results in deteriorated electrochemical performances, which hinders the future development and application of NIBs. Therefore, exploring anode materials that exhibit a novel kinetic mechanism is desired. Recently, extremely rapid kinetics has been realized by introducing the pseudocapacitance effect into battery systems; this effect generally refers to faradaic charge-transfer reactions, including surface or near-surface redox reactions, and fast bulk ion intercalation. To obtain a pseudocapacitance effect in battery systems, the critical step involves the rational design of a two-dimensional structure with a high conductivity. In this regard, the bimetallic sulfide thiospinel NiCo2S4 stands out by virtue of its high conductivity (1.25 x 10(6) S.m(-1)) at room temperature, which is at least two orders of magnitude higher than that of the oxide counterpart (NiCo2O4). Herein, NiCo2S4 hexagonal nanosheets with a large lateral dimension of similar to 2 mu m and thickness similar to 30 nm have been successfully synthesized through coprecipitation followed by a vapor sulfidation method. As the anode material in NIBs, the NiCo2S4 nanosheets deliver a reversible capacity of 387 mAh.g(-1) after 60 cycles at a current density of 1000 mA.g(-1). Additionally, the NiCo2S4 nanosheets exhibit high reversible capacities of 542, 398, 347, 300, and 217 mAh.g(-1) at the current densities 200, 400, 800, 1000, and 2000 mA.g(-1), respectively. Ex situ X-ray diffraction analysis has been employed to reveal that the sodium ion storage process is a result of a combined Na+ intercalation and conversion reaction between Na+ and NiCo2S4. Further quantitative analysis of the kinetics has verified the extrinsic pseudocapacitance mechanism of the Na+ storage process, in which the capacitive contribution enlarges as the current density increases. The observed capacitive contribution of NiCo2S4 electrode is as high as 71% at a scan rate of 0.4 mV.s(-1). This is closely attributed to the modified thin-sheet structure of NiCo2S4 and hybridization with graphene that account for the superior high-rate performance with long-term cyclability. These intriguing results shed light on a new strategy for the structural design of electrode materials for advanced NIBs. Moreover, this vapor transformation route can be extended to the preparation of other transition metal disulfides with high electrochemical activities, such as FeCo2S4, ZnCo2S4, CuCo2S4, etc.

An investigation of Ni-Co-Mn oxides as anodes for Li+/Na+ ion batteries

Co3O4/nitrogen-doped carbon nanoparticles for high-performance Li/Na-ion batteries

Ultrasmall MnO Nanoparticles Supported on Nitrogen-Doped Carbon Nanotubes As Efficient Anode Materials for Sodium Ion Batteries.

Na‐Mn‐O Nanocrystals as a High Capacity and Long Life Anode Material for Li‐Ion Batteries

A P2/O3 biphasic cathode material with highly reversibility synthesized by Sn-substitution for Na-ion batteries

Recent Progress of Layered Transition Metal Oxide Cathodes for Sodium‐Ion Batteries

Optimizing Electrochemical Performance in Sodium-Ion Batteries Using O3-type Na0.90Cu0.22Fe0.30Mn0.48O2 and Hard Carbon

Low-Temperature Metal-Catalysed Synthesis of Metal Oxide Nanoparticles Encapsulated and Nitrogen-doped Carbon Nanotubes from Carbon Nitride as Anodic Materials of High-Performance Lithium-Ion Batteries

Synthesis and Electrochemical Investigation of O3-Type High-nickel NCM Cathodes for Sodium-ion Batteries

Spinel-Structured, Multi-Component Transition Metal Oxide (Ni,Co,Mn)Fe2O4−x as Long-Life Lithium-Ion Battery Anode Material

High-Capacity and Self-Stabilized Manganese Carbonate Microspheres As Anode Material for Lithium-Ion Batteries.

MOF-derived porous NiCo2S4 nanocrystals embedded in nitrogen-doped carbon nanorods as lithium battery anodes

Layered Oxide Material as a Highly Stable Na‐ion Source and Sink for Investigation of Sodium‐ion Battery Materials

Sodium Ion Storage Performance of NiCo2S4 Hexagonal Nanosheets

Synthesis and electrochemical properties of nickel sulfide/carbon composite as anode material for lithium‐ion and sodium‐ion batteries

Synthesis and characterization of Ru doped NaNi0.5Mn0.3Ti0.2O2 cathode material with improved electrochemical performance for sodium-ion batteries

Probing the Structural Transition Kinetics and Charge Compensation of the P2-Na0.78Al0.05Ni0.33Mn0.60O2 Cathode for Sodium Ion Batteries.

Realization High-Voltage Stabilization of O3-Type Layered Oxide Cathodes for Sodium-Ion Batteries by Sn Simultaneously Dual Modification

Regulating the electrochemical activity of Fe-Mn-Cu-based layer oxides as cathode materials for high-performance Na-ion battery

Exploring the Stability Effect of the Co-Substituted P2-Na0.67[Mn0.67Ni0.33]O2 Cathode for Liquid- and Solid-State Sodium-Ion Batteries

High Performance Sodium-Ion Full Battery Based on One-Dimensional Nanostructures: the Case of Na0.44MnO2 Cathode and MoS2 Anode