Abstract:The P2-type Na0.66Ni0.33Mn0.67O2 electrode is one of the most promising layered cathodes, which exhibits high average potential of 3.5 V versus Na+/Na. When working at the high voltage range beyond 4.1 V versus Na+/Na, the Na0.66Ni0.33Mn0.67O2 electrode suffers from fast capacity decay. Substitution with electrochemically inactive metallic cations, such as Zn, as exhibited in our previous works, can dramatically relieve this phenomenon and improve the cyclability of Na0.66Ni0.33Mn0.67O2. Here, we designed a new Na0.66Ni0.33Zn0.07Mn0.60O1.93 compound by substituting Mn4+ ions in Na0.66Ni0.33Mn0.67O2 with Zn2+ and use it as cathode for sodium ion batteries. The successful preparation of targeted material was demonstrated by X-ray powder diffraction, Na-23 MAS NMR, X-ray absorption spectroscopy, X-ray photoemission spectroscopy, and IEC-AES measurements. The electrochemical results demonstrate that Na0.66Ni0.33Zn0.07Mn0.60O1.93 sample exhibits improved cycling stability as compared to Na0.66Ni0.33Mn0.67O2 within both 2.0-4.4 and 2.0-4.1 V. However, the capacity retention after 100 cycles within 2.0-4.4 V of Na0.66Ni0.33Zn0.07Mn0.60O1.93 is lower than that of Na0.66Ni0.26Zn0.07Mn0.67O2. The smooth voltage profiles and increased Na+ ion diffusion coefficient beyond 4.0 V of Na0.66Ni0.26Zn0.07Mn0.67O2 indicate that the improved performances are originated from preventing Na+/vacancy ordering by substituting Ni2+ with Zn2+. Our results not only suggest that Zn2+ ions in the transition metal layers may serve as "pillars" to alleviate the structure destruction during repeated electrochemical cycling but also indicate that properly select elemental substitution sites are important for optimizing the chemical design strategy of high-energy Na ion battery cathodes.

Exploring the Stability Effect of the Co-Substituted P2-Na0.67[Mn0.67Ni0.33]O2 Cathode for Liquid- and Solid-State Sodium-Ion Batteries

Exploring the Stability Effect of the Co-Substituted P2-Na 0.67 [Mn 0.67 Ni 0.33 ]O 2 Cathode for Liquid- and Solid-State Sodium-Ion Batteries

A Li-substituted Hydrostable Layered Oxide Cathode Material with Oriented Stacking Nanoplate Structure for High-Performance Sodium-Ion Battery

Probing the Structural Transition Kinetics and Charge Compensation of the P2-Na0.78Al0.05Ni0.33Mn0.60O2 Cathode for Sodium Ion Batteries.

Probing the Structural Transition Kinetics and Charge Compensation of the P2 Na₀. ₇₈Al₀. ₀₅Ni₀. ₃₃Mn₀. ₆₀O₂ Cathode for Sodium Ion Batteries

Lithium Substitution Modulation of P2-type Manganese-rich Oxide Toward High-stable and High-voltage Cathode for Sodium-ion Batteries

Stimulating the Redox Capacity by Multi-Ion Substitution for P2-type Sodium-Ion Battery Cathodes

The Effects of Dual Modification on Structure and Performance of P2-type Layered Oxide Cathode for Sodium-Ion Batteries

Manipulating Stable Layered P2‐Type Cathode via a Co‐Substitution Strategy for High Performance Sodium Ion Batteries

Rational Design of a P2-Type Spherical Layered Oxide Cathode for High-Performance Sodium-Ion Batteries

Achieving High Stability and Performance in P2‐Type Mn‐Based Layered Oxides with Tetravalent Cations for Sodium‐Ion Batteries

Lithium-Doping Stabilized High-Performance P2-Na0.66Li0.18Fe0.12Mn0.7O2 Cathode for Sodium Ion Batteries

Manipulating Na Occupation and Constructing Protective Film of P2-Na0.67Ni0.33Mn0.67O2 As Long-Term Cycle Stability Cathode for Sodium-Ion Batteries

Improving the stability of P2-type NaMn2/3Ni1/3O2 via phasic intergrowth induced by Li-ion substitution

Structure-Performance Relationship of Zn2+ Substitution in P2–Na0.66Ni0.33Mn0.67O2 with Different Ni/Mn Ratios for High-Energy Sodium-Ion Batteries

Na vacancies and Li doping synergistically constructed P2-type Na0.5Li0.1Ni0.2Mn0.7O2 as high-performance cathode material for sodium-ion batteries

Precisely Modulating the Structural Stability and Redox Potential of Sodium Layered Cathodes Through the Synergetic Effect of Co-Doping Strategy

Boosting Reversibility of Co-Doped P2-Type Na0.67MnO2 Multiple-Layer Oriented Stacking Nanosheets for Sodium-Ion Batteries

Construction of Cu-Zn Co-doped layered materials for sodium-ion batteries with high cycle stability

Al‐substituted Stable‐layered P2‐Na0.6Li0.15Al0.15Mn0.7O2 Cathode for Sodium Ion Batteries

Ti4+ Substitution Suppressing P2-O2 Phase Transition to Construct Stable P2-Na0.67ni0.33mn0.67o2 Cathode for Long-Term Durable Sodium-Ion Batteries