Effects of Different Materials and Structures on Mechanical Properties of Hail Used in Aviation Testing

Yewei Liu,Lifen Zhang,Xin Ge,Zhenxia Liu

DOI: https://doi.org/10.3390/aerospace11070508

IF: 2.66

2024-06-25

Aerospace

Abstract:Hail absorption test of aeroengine is one of the important components of airworthiness certification. The accurate test data are closely related to the density and mechanical properties of the artificial hail used in airworthiness tests. Through experimental research, this study explores the impact of distilled water, carbonated water and deionized water on the density and mechanical properties of artificial hail. The study addresses the significant differences between the density and mechanical properties of artificial hail and natural hail in existing studies. Based on this, a new method for preparing airworthiness test hail is proposed. The results indicate that artificial hail samples with distilled water as the hail core and carbonated water as the hail shell have densities ranging from 0.87 cm3 to 0.89 cm3. Furthermore, the estimated average maximum compressive strength of samples is 6.538 MPa, with some samples as low as 3.681 MPa. The mechanical properties of this artificial hail are more similar to those of natural hail. This method can more realistically simulate natural hail environments and can be used for the fine design of airworthiness certification criteria.

engineering, aerospace

What problem does this paper attempt to address?

This paper mainly discusses the influence of different materials and structures on the mechanical properties of artificial hailstones in aviation testing. The study found that the density of artificial hailstone samples, using distilled water as the core and carbonated water as the shell, ranged from 0.87 cm³ to 0.89 cm³, with an average maximum compressive strength of about 6.538 MPa, which is closer to the mechanical properties of natural hailstones. In existing research on artificial hailstones, the sample density is generally higher than 0.9 g/cm³, while the density of natural hailstones is usually between 0.8 and 0.9 g/cm³. Therefore, this method can more realistically simulate the natural hailstorm environment and is helpful for the refinement design of aviation airworthiness certification standards. The paper experimentally compared the effects of distilled water, carbonated water, and deionized water on hailstone density and mechanical properties, and proposed a new method for producing hailstones for aviation testing.