Abstract:In recent years, perovskite solar cell (PSC) has achieved power conversion efficiency as high as over 20 %, making it competitive with high-efficiency thin film solar cells such as CuInGaSe and CdTe solar cells. However, the critical issue of reliability and stability for PSC should be addressed since a significant degradation of photovoltaic (PV) performance at low temperature has been found regardless of planar mesoporous PSC. To reveal the degradation of PV performance in PSC, the temperature-dependent PV performance of the planar PSC is investigated in detail. A PSC sample is loaded into a cryostat chamber connected to a compressor and illuminated by a halogen lamp. The operating temperature varies from 200 K to 325 K and the current-voltage (J-V) characteristic of planar PSC is measured at different scan rates from 10 V/s to 0.0017 V/s. At a fast scan rate of 10 V/s, the PSC shows a low PV performance at either low temperature or high temperature. The short-circuit current (J(SC)), open-circuit voltage (V-OC) and maximum power point (P-MPP) are found to decline with the temperature decrteasing. Moreover, the J-V curve also shows the S-shape characteristic. This suggests that the inefficient transport of photo-generated carriers occurs in the PSC. Ions such as Pb2+, CH3NH(3+) and I-vacancies cause the screening effect of built-in field and the photo-generated carriers cannot be separated nor collected efficiently. As a result, J(SC) and V-OC show small values in J-V curves measured at a fast scan rate. However, the degradation in PV performance is temporary. The PV performance gradually reaches a steady state at different operating temperatures with scan rate going down to 0.0017 V/s. The P-MPP and V-OC increase with temperature decreasing. These results indicate that a long illumination time is necessary for PSC to reach a steady state. After long-time illumination under biased condition (i.e., J-V curves measured at slow scan rate), the built-in field is compensated for by the external bias and the ions piling in the interface regions have enough time to diffuse towards the opposite direction. Thus, the screening effect of built-in field is reduced and the PV performance of PSC reaches a steady state. According to the result of device simulation, the increasing V-OC at low temperature is attributed to the enhanced built-in potential difference and the reduced recombination rate of carriers. The temperature-dependent external quantum efficiency measurements of planar PSC before and after light illuminationis are performed to investigate the mechanism of carrier transport. It reveals that the separation and collection efficiencies of photo-generated carriers can be improved significantly after light illumination due to the fact that the screening effect of built-in field is reduced. These findings help understand the carrier transport mechanism in planar PSC.

Study on the properties of solar cell under bias condition by using impedance spectroscopy

Study on determination of I-V curve of dye-sensitized solar cell

Tuning of the Contact Properties for High-Efficiency Si/PEDOT:PSS Heterojunction Solar Cells

Electrochemical and Spectro-Microscopic Analyses of Charge Accumulation and Ion Migration in Dry Processed Perovskite Solar Cells under Electrical Biasing

Analyzing the PN junction impedance of crystalline silicon solar cells across varied illumination and temperature conditions

Influence of Polarized Bias and Porous Silicon Morphology on the Electrical Behavior of Au-porous Silicon Contacts

Carrier Dynamics of Nanopillar Textured Ultrathin Si Film/PEDOT:PSS Heterojunction Solar Cell

Real-Time Dynamic Observation of a Thermal and Electrical Coeffect on the Interfacial Evolution of Hybrid Perovskite Solar Cells by Electrochemical Impedance Spectroscopy

A Study of Hysteresis in Perovskite Solar Cell

From Dye Sensitized to Perovskite Solar Cells, The Missing Link

Temperature-Dependent Time Response Characteristic of Photovoltaic Performance in Planar Heterojunction Perovskite Solar Cell

Impact of Capacitive Effect and Ion Migration on the Hysteretic Behavior of Perovskite Solar Cells

The Exploration of Carrier Behavior in the Inverted Mixed Perovskite Single-Crystal Solar Cells

Effect Of Doping On The Short-Circuit Current And Open-Circuit Voltage Of Polymer Solar Cells

Influence of Temperature and Reverse Bias on Photocurrent Spectrum and Supra-Bandgap Spectral Response of Monolithic GaInP/GaAs Double-Junction Solar Cell

Manipulating the Migration of Iodine Ions via Reverse-Biasing for Boosting Photovoltaic Performance of Perovskite Solar Cells

Steady-state distributions of carrier concentration and recombination rates in a solar cell under operating conditions

Characterization of a Heterojunction Silicon Solar Cell by Means of Impedance Spectroscopy

Signal Components and Impedance Spectroscopy of Potential p‐Si/n‐CdS/ALD‐ZnO Solar Cells: EIS and SCAPS‐1D Treatments

The circuitry landscape of perovskite solar cells: An in-depth analysis

Stable photocurrent-voltage characteristics of perovskite single crystal detectors obtained by pulsed bias