Abstract:The heating problems in electronic devices have become even more significant with the development of technology and the rapid increase in areas of use. In cases where passive cooling and active cooling processes are not sufficient to improve overheating in electronic devices, high temperature generation is prevented by liquid cooling if convenient. The effect of nanofluid use on heat transfer to improve the thermal performance of liquid cooling systems was examined with computational fluid dynamics from numerical methods in this research. For different cooler designs, both single‐phase and multiphase modeling methods were utilized in fluid modeling in the research involving forced convection and heat transfer in laminar and turbulent flow. The mathematical models utilized were validated on different experimental and numerical researches. The single‐phase modeling was conducted for pure H2O, 1% Al2O3, 5% Al2O3 nanofluids at different Reynolds numbers. The analyzes were conducted at different Reynolds values and the increase in Reynolds value decreases the maximum temperature value at the output. In the multiphase modeling method, the nanofluid Al2O3 is defined and modelled as a separate phase suspended in different sizes into the base fluid H2O. The use of nanofluid increased the thermal conductivity in both methods compared to the use of pure H2O. At the same time, the use of nanofluids at 5% concentration gave better results than 1% concentration. As the temperature distributions are examined, the Mixture model, one of the single‐phase and multiphase modeling methods, presents very similar distributions. The effect of nanofluids on thermal performance varies depending on many parameters. A significant one is the size of the suspended nanoparticle. Different particle sizes, 20, 30, and 40 nm, were investigated in both Mixture and Eulerian modeling approaches in this research. Two different design coolers were utilized in the researches. In these designs, the flow is distributed in parallel and serpentine. The flow distribution and pressure drop also had an effect on thermal performance. The temperatures were read lower in the serpentine block, which provides a more regular flow distribution.

Impact of surfactant on Al 2 O 3 /water nanofluids stability for cooling the central processing unit of computer

Evaluation of Surfactant on Stability and Thermal Performance of Al2O3-ethylene Glycol (EG) Nanofluids

Nanofluids in microchannel heat sinks for efficient flow cooling of power electronic devices

Design of single and two phase modeled nanofluid CPU cooler and their numerical analysis

On Aqua-Based Silica (SiO2–Water) Nanocoolant: Convective Thermal Potential and Experimental Precision Evaluation in Aluminum Tube Radiator

Solar radiation and heat sink impact on fluctuating mixed convective flow and heat rate of Darcian nanofluid: Applications in electronic cooling systems

Cooling electronic components by using nanofluids: a review

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Experimental Investigation on Preparation and Stability of Al2O3 Nanofluid In Deionized Water and Ethylene Glycol

Application of CNTs/H2O nanofluid and the wavy fin with dimples in thermal management of CPU: A numerical modeling of hybrid passive cooling

Impact of colloidal properties of cupric oxide-water nanofluid on cooling of miniaturized systems: a numerical and experimental investigation

Investigation of Thermodynamic Properties and Stability of Metal Oxide (CuO and Al2O3)/Deionized Water Nanofluids for Enhanced Heat Transfer Applications

An Experimental Study on the Effect of Nanofluids on the Thermal Conductivity and Rheological Properties of a Coolant for Liquids

Effects of Nanofluid Flow in Micro channel Heat Sink for Forced Convection Cooling of Electronics Device: A Numerical Simulation

A CFD modeling of CPU cooling by eco-friendly nanofluid and fin heat sink passive cooling techniques

Enhancing Thermal–Hydraulic Performance in Nuclear Reactor Subchannels with Al2O3 Nanofluids: A CFD Analysis

Improvement of cooling of a high heat flux CPU by employing a cooper foam and NEPCM/water suspension

Natural Convection Immersion Cooling of the Cylinders in Nanofluids: Developing a New Nusselt Number Correlation

Molecular dynamics simulation of thermal behavior of nanofluid flow in a nanochannel with Cetryltrimethylammoniu Bromide surfactant molecules

Heat transfer enhancement of staggered water-droplet grooved microchannel heat sink using Al2O3 nanofluid

Study on Enhanced Heat Transfer and Stability Characteristics of Al2O3–SiO2/Water Hybrid Nanofluids