Reza Nageubri Balfas,Azhari Muhammad Syam,Muhammad Muhammad,Adi Setiawan,Herman Fithra
Abstract:Biodiesel, an alternative to traditional diesel, is essential for the sustainability of long-term energy supplies and often synthesized through a non-alcoholic route called interesterification. The described synthesis method facilitates the modification of oil and fat by exchanging acyl radical groups between triglyceride and alcoholic acid (alcoholysis), fat (acidolysis), or ester (transesterification). Therefore, this research aimed to determine the effect of the reactant ratio between crude palm oil (CPO) and dimethyl carbonate (DMC), along with the use of an eco-enzyme catalyst, on biodiesel characteristics. The CPO:DMC ratio was 1:1.5, 1:2, 1:2.5, and 1:3, while the immobilized eco-enzyme catalyst was 2%, 3%, 4%, 5%, and 6% of CPO mass. The results showed that interesterification with a 1:3 reactant ratio using a 4%wt catalyst was the best procedure, producing biodiesel yield of 73.65%, density of 0.860 g/mL, viscosity of 4.63 mm2/s (cSt), flash point of 113 °C, calorific value of 34.454 MJ/kg, and cetane number of 70.6%.
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to prepare biodiesel using dimethyl carbonate (DMC) and an immobilized eco - enzyme catalyst through a non - alcoholic synthesis route, and to study the effects of different reactant ratios (the ratio of crude palm oil to DMC), catalyst concentration, temperature and reaction time on the characteristics of biodiesel. Specifically, the research aims to determine the optimal reaction conditions to obtain biodiesel with a high yield and in line with the European biodiesel standard (EN 590).
### Research Background
1. **Energy and Environmental Issues**: Fossil fuel resources are limited and consumed in large quantities, leading to an increase in greenhouse gas emissions, especially carbon dioxide (CO₂), which poses a serious threat to the environment.
2. **Advantages of Biodiesel**: As a renewable and environmentally - friendly alternative fuel, biodiesel has the advantages of high energy density, good lubricating performance, low sulfur emissions, low production cost and easy transportation.
3. **Raw Material Selection**: Crude palm oil (CPO), due to its abundant sources and high fatty acid content, has become an ideal raw material for preparing biodiesel.
4. **Selection of Reactants and Catalysts**: Dimethyl carbonate (DMC), as a green alternative to methanol, can reduce the emission of harmful substances and has a relatively high oxygen content. The immobilized eco - enzyme catalyst has the advantages of low energy consumption, high activity and reusability.
### Research Purposes
1. **Optimize Reaction Conditions**: By changing the molar ratio of CPO to DMC, catalyst concentration, temperature and reaction time, determine the optimal conditions for biodiesel preparation.
2. **Evaluate Biodiesel Characteristics**: Measure the yield, density, viscosity, flash point, calorific value and cetane number of biodiesel, and conduct gas chromatography - mass spectrometry (GC - MS) analysis to determine whether its composition and quality meet the European biodiesel standard (EN 590).
### Main Findings
1. **Optimal Reaction Conditions**: When the molar ratio of CPO to DMC is 1:3, the catalyst concentration is 4% (mass fraction), the reaction temperature is 55°C, and the reaction time is 60 minutes, the yield of biodiesel reaches the highest, which is 73.65%.
2. **Biodiesel Characteristics**:
- Density: 0.860 g/mL
- Viscosity: 4.63 mm²/s
- Flash Point: 113°C
- Calorific Value: 34.454 MJ/kg
- Cetane Number: 70.6%
### Conclusion
This research has successfully prepared high - quality biodiesel through a non - alcoholic synthesis route, which not only improves the yield but also meets the requirements of the European biodiesel standard. This provides an important reference and basis for the industrial production and application of biodiesel.