Abstract:The fabrication of superhydrophobic coatings on mild steel has attracted considerable attention. However, some methods are cumbersome and unsuitable for large-scale preparation, limiting industrial applications. Furthermore, the extensive use of fluorinated compounds to achieve low surface energy is not environmentally friendly. This paper proposed a facile method based on electrodeposition and annealing to prepare mild steel-based superhydrophobic surfaces without chemical modifications. Subsequently, SEM images were analyzed, and it was observed that the plating parameter (current and time) significantly affected surface morphology. At optimum process parameters, a rough surface with a multi-level structure was formed on the plated surface, contributing to superhydrophobic properties. XPS, EDS, and XRD were utilized to analyze surface composition. The results indicated the presence of copper oxides, zinc oxides, and a large number of hydrocarbons on the prepared superhydrophobic surface. These transition metal oxides on the surface adsorbed hydrocarbons in the air during the annealing process, which lowered the surface energy. Combined with the obtained multi-level morphology, a superhydrophobic surface was achieved. Finally, the corrosion behavior was evaluated in 3.5 wt% NaCl solution by AC impedance spectroscopy. Results showed that the obtained superhydrophobic surface, compared with the untreated coating and the steel substrate, showed a substantial improvement in corrosion resistance. A mild steel-based superhydrophobic surface with a contact angle greater than 150 degrees and excellent corrosion resistance was finally obtained. We hope this study will facilitate the industrial preparation of superhydrophobic coatings, especially in marine engineering, since this method does not require complex processes or expensive equipment and does not require fluorinated substances.

A simple, inexpensive and environmental-friendly electrochemical etching method to fabricate superhydrophobic GH4169 surfaces

Fabrication of superhydrophobic aluminum alloy surfaces by nickel and phosphorus chemical deposition

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

Fabrication of Superhydrophobic Aluminum Surface by Droplet Etching and Chemical Modification

A Novel Simple Approach to Preparation of Superhydrophobic Surfaces of Aluminum Alloys

Preparation of superhydrophobic titanium surfaces via electrochemical etching and fluorosilane modification

A simple strategy towards construction of fluorine-free superhydrophobic aluminum alloy surfaces: self-cleaning, anti-corrosion and anti-frost

Electrochemical fabrication of superhydrophobic 304 stainless steel by neutral electrolyte

Fabrication of Aluminum Superhydrophobic Surface with Facile Chemical Etching Method

Superamphiphobic triple-scale micro-/nanostructured aluminum surfaces with self-cleaning and anti-icing properties

An Environment-Friendly Fabrication of Superhydrophobic Surfaces on Steel and Magnesium Alloy

Fabrication and Characterization of Superhydrophobic Surfaces on Aluminum Alloy Substrates

Optimal conditions for the fabrication of alumina superhydrophobic surfaces via anodization, and its self-cleaning, anti-icing, and cold-resistance capabilities

Achieving hierarchical structure with superhydrophobicity and enhanced anti-corrosion via electrochemical etching and chemical vapor deposition

A Facile Cost-Effective Method for Preparing Superhydrophobic Self-Cleaning Silica Nanoparticles Coating on Al Substrate

A Superhydrophobic Self‐Cleaning and Anti‐Icing Aluminum Sheet Fabricated by Alkaline Solution

Convenient And Large-Scale Fabrication Of Cost-Effective Superhydrophobic Aluminum Alloy Surface With Excellent Reparability

Facile and Eco-Friendly Preparation of Mild Steel Based Superhydrophobic Surfaces without Chemical Modifications

A Simple Method to Prepare Superamphiphobic Aluminum Surface with Excellent Stability

Fabrication and anti-corrosion performances of robust superhydrophobic surface on NAB via solution-etching

Facile etching fabrication of superhydrophobic 7055 aluminum alloy surface towards chloride environment anticorrosion