Abstract:High-entropy alloys (HEAs) fabricated by powder metallurgy are considered to exhibit extremely-great potential application values in the field for high-speed impact deformation due to their uniform microstructures and compositions. The mechanical behavior of a powder-metallurgy-fabricated (PM) CoCrFeMnNi HEA was investigated at room temperature with strain rates ranging from 1200 s−1 to 2800 s−1. It was found that the serration behavior and shear localization of the alloy under dynamic conditions occurred. Results also indicated that the serrated flow took place in the PM CoCrFeMnNi HEA during mechanical deformation at high strain rates (>1000 s−1) and became more pronounced as the strain rate increased. Furthermore, it was determined that the yield-strength values of the PM CoCrFeMnNi HEA were sensitive to strain rates, where the values increased from 500 MPa to 700 MPa when the strain rates increased from 1200 s−1 to 2800 s−1. Shear bands with a width of about 20 μm were generated in the PM CoCrFeMnNi HEA after the shear stress reached a maximum value of 635 MPa, which corresponded to a nominal strain of about 8.71. Nanotwins and ultrafine-equiaxed grains with a diameter of about 150 nm also developed at the core of the shear band during deformation. The results revealed that the strength of the shear band was much higher than that of the matrix grain. Nanotwins in the shear band were composed of a single face-centered-cubic (FCC) structure with the twin plane of (1 ̄11 ̄), which could be formed via a rotational dynamic recrystallization (RDR).

Diffusion in ultra-fine-grained CoCrFeNiMn high entropy alloy processed by equal-channel angular pressing

Modifying Element Diffusion Pathway by Transition Layer Structure in High-Entropy Alloy Particle Reinforced Cu Matrix Composites

Tensile Deformation Behaviors of CuNi Alloy Processed by Equal Channel Angular Pressing

Deformation mechanism and microstructure evolution during superplastic deformation of friction stir processed CoCrFeNiMn high entropy alloy

Interfacial behaviour of the high-entropy alloy CuCoCrFeNi and TC4 joint obtained by vacuum diffusion welding

Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement

Grain boundary diffusion in CoCrFeMnNi high entropy alloy: kinetic hints towards a phase decomposition

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Radioactive isotopes reveal a non sluggish kinetics of grain boundary diffusion in high entropy alloys

Grain Refinement and Strengthening of an Aluminum Alloy Subjected to Severe Plastic Deformation through Equal-Channel Angular Pressing

Bulk and grain boundary tracer diffusion in multiphase AlCoCrFeNiTi 0.2 compositionally complex alloy

Interdiffusion in the FCC-structured Al-Co-Cr-Fe-Ni High Entropy Alloys: Experimental Studies and Numerical Simulations

Investigation of Accelerated Recrystallization Behavior Via Electropulsing Treatment in CoCrFeMnNi High-Entropy Alloy

Tunable interstitial and vacancy diffusivity by chemical ordering control in CrCoNi medium-entropy alloy

In-situ microstructural evolution during tensile loading of CoCrFeMnNi high entropy alloy welded joint probed by high energy synchrotron X-ray diffraction

Simulation of bulk and grain boundary diffusion phenomena in a high entropy CoCrFeMnNi alloy by molecular dynamics

Exploring hot deformation behavior of equimolar CoCrFeNi high-entropy alloy through constitutive equations and microstructure characterization

Self-diffusion in carbon-alloyed CoCrFeMnNi high entropy alloys

Positron Annihilation Study of Open-Volume Defects and Cr Segregation in Deformed Cocrfemnni Alloy

Mechanical behavior and shear band of a powder-metallurgy-fabricated CoCrFeMnNi high-entropy alloy during high strain-rate deformation