Abstract:Author(s): Fang Yu-Xuan, Yang Yi, Xia Zhi-Liang, Huo Zong-Liang Three-dimensional (3D) NAND flash memory is a key technology in the field of mainstream memory solutions, which is primarily due to its extremely low bit cost. The architecture of 3D NAND, characterized by its vertically stacked design, substantially enhances the capacity of individual chips. This advancement is completely consistent with the demands for high-capacity data storage in contemporary environments, securing its widespread adoption in diverse application scenarios. As storage density increases, the complexity of process integration increases, bringing new challenges. The word lines in 3D NAND are typically filled by using gate replacement techniques, and compared with chemical vapor deposition (CVD), atomic layer deposition (ALD) is favored for its superior step-coverage, especially for depositing tungsten (W) at the gate. However, due to the complexity of the replacement gate deposition structure, fluorine (F) residues are found in the voids of the tungsten metal gate filling structure and diffuse into the surrounding structure under subsequent process conditions, corroding other films such as silicon oxide and degrading device performance and reliability. To alleviate the problem of fluorine attack, a thin layer of titanium nitride is usually deposited as a barrier layer before deposition of tungsten gate, which blocks the fluorine in the tungsten gate and prevents its diffusion into the oxide layer. Previously, there were studies to increase the ability to stop F diffusion by varying the thickness of the F blocking layer (TiN). However, increasing the thickness of TiN will further increase the complexity of high aspect ratio etching in the 3D NAND process, which will have adverse effect on subsequent processes. To further minimize the effect of fluorine erosion, residual fluorine elements can be removed by introducing annealing in the subsequent process flow. In the actual 3D NAND process, elemental fluorine (F) is adsorbed and accumulates on the TiN surface, and is further activated by subsequent high-temperature processes, leading to severe fluorine erosion. The delay between TiN deposition and subsequent processing steps is hypothesized to facilitate fluorine adsorption due to the oxidation of TiN. This work corroborates this hypothesis through first-principles calculations, and demonstrates the role of TiN oxidation in fluorine adsorption. In this work, we evaluate the effect of this oxidation on the fluorine-blocking effectiveness of the TiN barrier layer. We simulate the adsorption of fluorine-containing by-products on TiN and its oxides, providing theoretical insights into mitigating fluorine attack. The higher degree of oxidation of TiN is more likely to cause F adsorption, and Ti exposed surface TiN is more prone to oxidation, which is more likely to cause F adsorption in unoxidized condition and oxidized condition. Based on these insights, we implemente an ammonia purge treatment in 3D NAND manufacturing, which effectively minimizes fluorine attack, reducing the leakage probability of word line by 25% and wafer warpage by 43%. Acta Physica Sinica. 2024 73(12): 128502. Published 2024-06-20

Compact thermally stable high voltage FinFET with 40 nm tox and lateral break-down >35 V for 3D NAND flash periphery application

Computational Associative Memory with Amorphous Metal‐Oxide Channel 3D NAND‐Compatible Floating‐Gate Transistors

An Optimized Device Structure with a Highly Stable Process Using Ferroelectric Memory in 3D NAND Flash Memory Applications

First Experimental Demonstration of Self-Aligned Flip FET (FFET): A Breakthrough Stacked Transistor Technology with 2.5T Design, Dual-Side Active and Interconnects

A Multi-Layer Stackable Thin-Film Transistor (TFT) NAND-Type Flash Memory

Computational Associative Memory with Amorphous InGaZnO Channel 3D NAND-Compatible FG Transistors

Beyond 10 μm Depth Ultra-High Speed Etch Process with 84% Lower Carbon Footprint for Memory Channel Hole of 3D NAND Flash over 400 Layers

High Performance HfLaO-based TiO2-Channel FE V-NAND with High Consistency and Low Operation Voltage

Oxide-semiconductor channel ferroelectric field-effect transistors for high-density memory applications: 3D NAND operation and the potential impact of in-plane polarization

Drive Current and Hot Carrier Reliability Improvements of High-Aspect-Ratio N-Channel Fin-Shaped Field Effect Transistor with High-Tensile Contact Etching Stop Layer

A Highly Stackable Thin-Film Transistor (TFT) NAND-Type Flash Memory

First-principles study of F adsorption by TiN with its oxide surface in three-dimensional NAND flash memory

High-voltage FinFET with floating poly and high-k material for enhanced intrinsic gain and safe operating area

Multiple Workfunction High Performance FinFETs for Ultra-low Voltage Operation

A Novel High Programming Efficiency and Highly Scalable Flash Memory Cell Based on Tunneling Fet (Tfet)

A Novel Body-Tied Fin Field Effect Transistor Flash Memory Structure with Λ-Shaped Floating Gate for Sub 45 Nm NOR Flash Memory

A novel flash memory cell and design optimization for high density and low power application

High-Density FinFET One-Time Programmable Memory Cell With Intra-Fin-Cell-Isolation Technology

Electrospun Highly Aligned IGZO Nanofiber Arrays with Low‐Thermal‐Budget for Challenging Transistor and Integrated Electronics

Finfet Gate Etch Towards 16nm Node CMOS Technology