Abstract:Ceramics including oxides, carbides, nitrides, borides, carbonitrides, silicates, and MAX phases have wide applications in electrode materials, high-temperature structural materials, and anticorrosive materials for harsh environments. However, the difficulty in processing ceramics with complex shapes from green powders has been restricting applications in emerging areas. Herein, polymer-derived ceramics (PDCs) were used to assist the pressureless processing of MAX phase particles. The processing temperature could be lowered by 400 to 600 °C, which is favorable for both industrialization and engineering applications. The good processability of MAX-preceramic polymer mixtures and high accuracy of replica from preceramic polymer make it possible to fabricate artificial objects with complex shapes and fine texture. This method provides a method to fabricate MAX phase ceramics/composites, as well as some other ceramics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22289?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22289</a>.SEM images of Ti3AlC2 particles after ball-milling, TGA curve of PD4 in nitrogen, X-ray diffraction patterns of the samples with different Ti3AlC2 content, the fracture surfaces of Ti3AlC2–SiOC samples, TGA curve of 60%Ti3AlC2–PD4 in argon, SEM of the MAX-PD4 composite before heat treatment, HRTEM and line scanning of Ti3AlC2–SiOC, Vickers' hardness of Ti3AlC2–SiOC, and the flexural strength of Ti3AlC2–SiOC (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22289/suppl_file/am0c22289_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The consolidation of SiC ceramics using MAX phases as a new family of sintering activators

Al2O3 Fiber-Reinforced MAX Phase Ceramic Matrix Composite

Preparation and performance of MAX phase Ti3AlC2 by in-situ reaction of Ti-Al-C system

Consolidation and synthesis of MAX phases by Spark Plasma Sintering (SPS): a review

MAX Phase Ceramics/Composites with Complex Shapes

Effect of Nb addition on the microstructure and mechanical properties of additively manufactured Ti2AlC MAX-phase ceramic matrix composites

Synthesis and Reaction Path of Ti‐Al‐C MAX Phase by Reaction with Ti‐Al Intermetallic Compounds and TiC

Effect of SiC on Microstructure, Phase Evolution, and Mechanical Properties of Spark-Plasma-Sintered High-Entropy Ceramic Composite

Preparation and mechanical properties of titanium alloy matrix composites reinforced by Ti3AlC and TiC ceramic particulates

β→α Phase Transformation and Properties of Solid-State-Sintered SiC Ceramics with TaC Addition

Structure and Properties of Spark Plasma Sintered SiC Ceramics with Oxide Additives

Comparing the effects of different sintering aids on spark plasma sintering of SiC ceramics

Synthesis, properties and thermal decomposition of the Ta4AlC3 MAX phase

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

Fabrication, Microstructure, and Properties of SiC/Al 4 SiC 4 Multiphase Ceramics Via an In-Situ Formed Liquid Phase Sintering

Sintering Behavior, Microstructure and Mechanical Properties of Silicon Carbide Ceramics Containing Different Nano-Tin Additive

Preparation Of Sic Ceramics By Spark Plasma Sintering

Self-Propagating High-Temperature Synthesis of Ti3SiC2 and Ti3AlC2 Single-Phase MAX Phases in Mechanically Activated Mixtures of Initial Reactants

Structural-Phase State and Properties of SiC Ceramics Obtained by Ultrasound-Assisted Liquid-Phase Sintering with Eutectic Additives

Microstructure and Mechanical Properties of the Spark Plasma Sintered Tac/Sic Composites: Effects of Sintering Temperatures

Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering