Abstract:The absorption heat exchanger is a key component in the novel district heating systems based on absorption cycles. It can maintain the primary water return temperature at a quite low level and realize covering more waste heat recycle. Because in most working conditions the temperature drop and rise in a single absorber or evaporator is as high as 20-30 K, the multi-stage structure of this device has been proposed. The theoretical analysis have shown that this kind of structure can make heat transfer process more matched to realize much lower outlet temperature of primary water, while single-stage structure can only achieve a relatively high level. This is because of the multi-stage pressure and temperature gradient. In this study, based on the absorption heat exchanger technology, a vertical three-stage absorber-evaporator experiment unit was designed and built. On a large vacuum test bench, experiments were carried out in different conditions to test the performance. The result shows the experiment unit can achieve large temperature difference on the water side and form three stages of evaporating pressure gradient. With three-stage evaporating pressure gradient, the large triangle heat transfer process disappeared. The most important thing is that it can reduce the water temperature of evaporator side to a low level. Compared with traditional single-stage absorption heat pump, the heat transfer process in the whole absorber and evaporator is more matched and the performance can be better. In the experiment, an important phenomenon shows that the outlet water temperature of the first stage absorber is even higher than the inlet solution temperature. A 1-D differential model was built to analyze and explain the temperature variation inside the device so this experimental phenomenon can be reasonably explained. Finally the experiment unit was directly applied in a real district heating system. It worked as part of a complete multi-stage absorption heat exchanger in one thermal station of the district heating system. The machine has great performance in different heating conditions. It also formed three stages of evaporating pressure gradient. The primary water return temperature, that is, the water outlet temperature of the evaporator, can be as low as 25℃. The temperature level is satisfying and brings lots of benefits to the whole heating system.

Predicting evaporation heat transfer coefficient distribution in multi-path alternating-laminated-microchannel-tube (ALMT) heat exchanger based on infrared thermography

Experimental Study of Condensation Heat Transfer of R134a Inside the Micro-Fin Tubes at High Mass Flux

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Two-phase refrigerant maldistribution and optimization design in novel alternatively-laminated-microchannel-tube (ALMT) heat exchangers with vertical headers

Research on heat transfer property of air-air micro channel evaporator

Thermal and hydraulic analysis of a brazed aluminum evaporator

Prediction of evaporation heat transfer coefficient based on gas–liquid two-phase annular flow regime in horizontal microfin tubes

A Three-Zone Analytical Model For Performance Prediction Of A Brazed Aluminum Evaporator Operating Under Dehumidifying Condition - Part 2 - Verification Of The Computer Code And Examples Of Application

Numerical Study on Flow Heat Transfer Characteristics of Horizontal Tube Falling-Film Evaporator

Experimental Study and Application of Multi-Stage Absorber/ Evaporator Based on Absorption Heat Exchanger

Numerical Investigation on Flow Boiling Heat Transfer in Elliptic Microchannel Heat Exchanger with Micro Fins

Evaluation of Prediction Methods for Heat Transfer Coefficient of Annular Flow and a Novel Correlation

Modeling Method for Overheated Zone and Two-Phase Zone of Dry Shell-and-Tube Evaporator in Ship Air Conditioning

Experimental and theoretical investigation of the influence of heat transfer rate on the thermal performance of a multi-channel flat heat pipe

HEAT TRANSFER OPTIMIZATION OF THE HORIZONTAL TUBE BUNDLES IN FALLING FILM EVAPORATORS

Two-Phase Flow Heat Transfer In Micro-Fin Tubes

Experimental investigation on the flow boiling of R134a in a plate heat exchanger with mini-wavy corrugations

An experimental study and infrared thermography analysis on the effect of using various flute-type distributors in mini-channel evaporators employed by room air conditioners

A Three-Zone Analytical Model For Performance Prediction Of A Brazed Aluminum Evaporator Operating Under Dehumidifying Condition - Part 1 - Analysis Method

Evaporation Heat Transfer Characteristics of R410A Inside Horizontal Three-Dimensional Enhanced Tubes

EXPERIMENTAL STUDY ON HEAT FLUX EFFECT ON EVAPORATION IN TWO DIMPLE-GROOVED TUBES