Abstract:Sn-based perovskite solar cells (PSCs) have received extensive attention for photovoltaic applications. Nevertheless, the low crystallization quality of the film due to rapid crystallization results in high trap density of states, which is one of the main reasons for poor performance of Sn-based PSC devices. In this work, we developed a strategy for the formation of FASnI3 perovskites by introducing the addition of formamidine acetate (FAAc). Benefiting from the iodide-coordinated cation (FA+) and crystallization-regulated anion (AC–), FAAc could achieve the high-quality films with suppressed defects. The champion power conversion efficiency (PCE) of FAAc-modified PSC devices reached 9.96%, reserving 82% of their initial PCE of the light aging test over 1500 h. We hope that our finding could provide implications on the high-performance and stable Sn-based PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05097?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05097</a>.Calculation details of t-DOS; FTIR spectra of the unannealed FAAc film and FAAc-modified FASnI3 film, dissolved in DMSO solution; grain size distribution estimation of the pristine perovskite film and FAAc-modified films as estimated from the SEM images using ImageJ software and broken line graph of grain sizes distributions estimation; fwhm of the (100) peak in the XRD pattern of the pristine perovskite film and FAAc-modified films and broken line graph of fwhm; AFM images of the pristine perovskite film and FAAc-modified films; broken line graph of RMS; box statistics chart of VOC, JSC, FF, and PCE for pristine and FAAc-modified PSCs; UV–vis images of the pristine perovskite film and FAAc-modified films; dark J–V curves of pristine and FAAc-modified devices and the dark saturation current density (J0) of pristine and FAAc-modified devices; contact angle for FASnI3 and 5% FAAc-modified films; t-DOS in PSCs with or without FAAc; photovoltaic performance parameters of pristine and FAAc-modified PSCs; and parameters of the TRPL spectroscopy of pristine and FAAc-modified PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05097/suppl_file/am1c05097_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Formamidine Acetate Induces Regulation of Crystallization and Stabilization in Sn-Based Perovskite Solar Cells

Stabilization of Perovskite Lattice and Suppression of Sn2+/Sn4+ Oxidation via Formamidine Acetate for High Efficiency Tin Perovskite Solar Cells

Interface modification by formamidine acetate for efficient perovskite solar cells

Multifunctional anion-cation modulation engineering for Sn-Pb perovskite solar cells

Regulated Crystallization of FASnI 3 Films through Seeded Growth Process for Efficient Tin Perovskite Solar Cells

Oriented Perovskite Crystal towards Efficient Charge Transport in FASnI 3 Perovskite Solar Cells

Designed Additive to Regulated Crystallization for High Performance Perovskite Solar Cell

Phosphonate Diacid Molecule Induced Crystallization Manipulation and Defect Passivation for High‐Performance Inverted MA‐Free Perovskite Solar Cells

High-efficiency and stable FA 0.75 MA 0.25 SnI 3 perovskite solar cells with large-size crystal grains prepared by doping with multifunctional chloride salt

Facile synthesized acetamidine thiocyanate with synergistic passivation and crystallization for efficient perovskite solar cells

Surface Formamidine Cation Immobilization for Efficient FA-Based Perovskites Solar Cells

Ammonium Sulfate to Modulate Crystallization for High-Performance Rigid and Flexible Perovskite Solar Cells

Highly Efficient and Stable FASnI3 Perovskite Solar Cell via Modification with Tetrapotassium Hexacyanoferrate

Crystal Growth Regulation of α‐FAPbI3 Perovskite Films for High‐Efficiency Solar Cells with Long‐Term Stability

Formamidine formate as the multifunctional modulator at buried interface for efficient FAPbI3 perovskite solar cells

Regulating the Crystallization of FAPbI3‐Based Perovskite with a Furan Substituted Ethylammonium Additive for Achieving Highly Efficient Solar Cells

Vapor Deposition of FAI on SnO 2 Provides Interface Modification and Crystallization Control for High-Performance and Stable Perovskite Solar Cells

The Molecular Additive N-Acetyl-L-Phenylalanine Delays the Crystallization and Suppresses the Phase Impurity for Achieving Triple-Cation Perovskite Solar Cells with Efficiency over 25.

Degradation mechanism and stability improvement of formamidine-based perovskite solar cells under high humidity conditions

Stable and Efficient Tin-Based Perovskite Solar Cell via Semiconducting–Insulating Structure

Bi-Linkable Reductive Cation as Molecular Glue for One Year Stable Sn-Based Perovskite Solar Cells