Increasing strength and electrical conductivity of Cu-0.77%Cr-0.86%Hf alloy by rotary swaging and subsequent aging

N. Martynenko,O. Rybalchenko,P. Straumal,N. Tabachkova,E. Lukyanova,G. Rybalchenko,D. Prosvirnin,E. Beletsky,P. Prokofiev,V. Yusupov,S. Dobatkin,B. Straumal

DOI: https://doi.org/10.1007/s10853-024-09332-x

IF: 4.5

2024-01-29

Journal of Materials Science

Abstract:The effect of cold rotary swaging (RS) and subsequent aging on the structure, electrical conductivity, mechanical characteristics and fracture toughness of the Cu-0.77%Cr-0.86%Hf alloy was studied. RS leads to the formation of a microstructure elongated along the direction of deformation with grains width of 8.0 ± 0.2 μm. An ultrafine-grained structure with shear bands of 370 ± 10 nm in width and subgrains of 500 ± 13 nm in size is formed inside these elongated grains. The refinement of the microstructure after RS leads to an increase in ultimate tensile strength (UTS) from 300 ± 5 to 505 ± 12 MPa and a decrease in ductility from 54.0 ± 2.4 to 12.9 ± 0.3%. A subsequent aging of the alloy leads to the precipitation of fine particles of Cr and Cu 5 Hf phases. The precipitation of these particles leads to an additional increase in UTS of RS-treated alloy up to 558 ± 11 MPa and ductility up to 15.4 ± 2.4%. In this case, the decomposition of the supersaturated solid solution, which accompanies the particles precipitation, leads to an increase in the electrical conductivity of the deformed alloy up to 77.7 ± 1.6%IACS. The combination of RS and subsequent aging at a temperature of 450 °C for 4 h leads to an increase in the fatigue limit from 220 to 393 MPa. In addition, this treatment allows to increase the fracture toughness coefficient by 6 times.

materials science, multidisciplinary