Abstract:Nanofiltration (NF) with high water flux and precise separation performance with high Li+/Mg2+ selectivity is ideal for lithium brine recovery. However, conventional polyamide-based commercial NF membranes are ineffective in lithium recovery processes due to their undesired Li+/Mg2+ selectivity. In addition, they are constrained by the water permeance selectivity trade-off, which means that a highly permeable membrane often has lower selectivity. In this study, we developed a novel nonpolyamide NF membrane based on metal-coordinated structure, which exhibits simultaneously improved water permeance and Li+/Mg2+ selectivity. Specifically, the optimized Cu–m-phenylenediamine (MPD) membrane demonstrated a high water permeance of 16.2 ± 2.7 LMH/bar and a high Li+/Mg2+ selectivity of 8.0 ± 1.0, which surpassed the trade-off of permeance selectivity. Meanwhile, the existence of copper in the Cu–MPD membrane further enhanced anti-biofouling property and the metal-coordinated nanofiltration membrane possesses a pH-responsive property. Finally, a transport model based on the Nernst–Planck equations has been developed to fit the water flux and rejection of uncharged solutes to the experiments conducted. The model had a deviation below 2% for all experiments performed and suggested an average pore radius of 1.25 nm with a porosity of 21% for the Cu–MPD membrane. Overall, our study provides an exciting approach for fabricating a nonpolyamide high-performance nanofiltration membrane in the context of lithium recovery.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02252?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02252</a>.SEM images and photos of prepared membranes; ζ-potential of Cu–MPD NF membrane and PES substrate; AFM images of prepared membranes; XPS spectra and ζ-potential of prepared membranes; copper loading in the prepared membrane with different Cu/MPD ratios; UV–vis spectra and thickness of Cu–MPD oligomers with different Cu/MPD ratios; separation performance of membrane with different components; membrane anti-biofouling ability test by rotating disk; membrane anti-biofouling ability test by cross-flow filtration; copper leaching test in pure water; comparison of membrane filtration performance in this work to the literature; membrane long-term running stability test; feed, retentate, and permeate concentration in 12 h filtration; recipe for fabricating the Cu–MPD membrane; contact angle and isoelectrical point of prepared membranes; comparison of this work to the literature; Cu loading concentration in different types of membranes; average biofilm thickness and average biovolume on the surface of prepared membranes; I and Cu concentrations before and after 5 h reaction; performance of membrane with different recipes; and recipe of the membranes in Table S7 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02252/suppl_file/am1c02252_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Development of a HTPB-PMHS stability-enhanced extraction gel membrane for nickel ion recovery

Tactfully Introducing Amphoteric Group into Electroactive Membrane Motivates Highly Efficient H2O Splitting for Reversible Removal and Recovery of Nickel(ii)

A Positively Charged Tight UF Membrane and Its Properties for Removing Trace Metal Cations Via Electrostatic Repulsion Mechanism.

Electro-membrane extraction of lithium with D2EHPA/TBP compound extractant

Highly Efficient Capture of Heavy Metal Ions on Amine-Functionalized Porous Polymer Gels

Efficient Separation and Recovery of Precious Metal Ions by Polymer Inclusion Membranes (PIMs): A Mini Review

Improving Mg 2+ /Li + separation performance of polyamide nanofiltration membrane by swelling-embedding-shrinking strategy

Novel Positively Charged Metal-Coordinated Nanofiltration Membrane for Lithium Recovery

Process intensification in the extraction of Mn from spent Li-ion battery simulated leachate via (G1/W+G2)/O microdispersion system with phase inversion

Emulsion liquid membrane (ELM) enhanced by nanoparticles and ionic liquid for extracting vanadium ions from wastewater

Dialysis Technology Supporting the Preparation of Acid-Resistant Picolylamine-Based Hydrogel Sphere for Selectively Recycling Copper, Nickel and Cobalt from Strongly Acidic Wastewaters

Stable and easily detachable cellulose-based membrane system inspired by water hyacinth for efficient heavy metals removal from water

Amino-Functionalized Porous Nanofibrous Membranes for Simultaneous Removal of Oil and Heavy-Metal Ions from Wastewater

Surface implantation of ionically conductive polyhydroxyethylaniline on cation exchange membrane for efficient heavy metal ions separation

Mechanistic investigation of intensified separation of molybdenum(VI) and vanadium(V) using polymer inclusion membrane electrodialysis

Polyethyleneimine-grafted membranes for simultaneously adsorbing heavy metal ions and rejecting suspended particles in wastewater

Superhydrophilic polyethersulfone (PES) membranes with high scale inhibition properties obtained through bionic mineralization and RTIPS

Integration of Bipolar Membrane Electrodialysis with Ion-Exchange Absorption for High-Quality H3PO2 Recovery from NaH2PO2

Efficient removal of nickel(II) from high salinity wastewater by a novel PAA/ZIF-8/PVDF hybrid ultrafiltration membrane.

Separation of heavy metals from dilute solutions using D2EHPA carrier fixed onto the outer surface of coaxially electrospun core-sheath fibers

Hydrophilic Side Chain Assisting Continuous Ion-Conducting Channels for Anion Exchange Membranes