Abstract:Pure tungsten (W) is generally believed to be a preferred alternative material for kinetic penetrators once a "self-sharpening" effect can be realized by inducing adiabatic shear failure during high-speed impact. However, it is still a major challenge to trigger adiabatic shear bands (ASBs) in pure W with low ductility. In this work, we reported an improved adiabatic shear susceptibility of pure W by controlling the texture evolution during the pre-rolling process. As the rolling strain increased, the texture components and intensity underwent crucial variations to facilitate the appearance of ASBs. For comparative studies, we investigated the dynamic behavior of three kinds of W samples with different microstructural features at a wide range of temperatures (298K∼1473K) via SHPB system, including coarse-grained W (CGW), as-rolled W samples to the thickness reductions of 75% (75W) and 80% (80W). The experimental results revealed a transition of failure behavior from typical brittle fracture to adiabatic shear instability under uniaxial dynamic compression. Of particular interest was that although 75W and 80W exhibited almost the same mechanical properties after the similar rolling reductions, their dynamic instability behaviors differed remarkably with different spatial distributions of texture components. In the as-rolled 75W, two dominant texture components of {001} and {111} were alternate to form fully spaced layers. Under uniaxial compression, the {111} "hard orientation layers" became the obstacles to the propagation of ASBs. Fortunately, in 80W specimens the different {001} "soft orientation layers" were interconnected by the "soft bricks" of the same orientation, which provided pathways for the expansion of shear localization and ultimately the triggering of ASBs. Through subsequent crystal plasticity finite element (CPFEM) simulations, we further verified the effect of orientation distributions on the shear localization and thoroughly explained the formation mechanism of ASBs in the highly textured refractory metal. This may provide guidance for producing advanced materials for certain practical applications.

The effect of shock-wave profile on dynamic brittle failure

Investigation of dynamic response of brittle materials under high-rate loading

Experimental and Numerical Simulations of ELM-like Transient Damage Behaviors to Different Grade Tungsten and Tungsten Alloys

Influence of Surface Morphology and Microstructure on Performance of CVD Tungsten Coating under Fusion Transient Thermal Loads

S-wave Tracing Technique to Investigate the Damage and Failure Behavior of Brittle Materials Subjected to Shock Loading

Damage Evolution and Spall Failure in Copper under Complex Shockwave Loading Conditions

Meso–Macro Energy Exchange in Shock-Wave Processes and Dynamic Strength of AB2 Steel

Enhanced spall strength of single crystal aluminum by temperature rise mitigation and structural phase transition under shock pulse

Unsupported Shock Wave Induced Dynamic Fragmentation of Matrix in Lead with Surface Grooves

Mechanical Behavior and Dynamic Failure of High-Strength Ultrafine Grained Tungsten under Uniaxial Compression

Shock and spallation behavior of ultrahigh molecular weight polyethylene

Spallation of polycrystalline tungsten using laser-induced shock at ultrahigh strain rates

Fracture of brittle solids under impact: The decisive role of stress waves

Atomistic Simulations and Modeling Analysis on the Spall Damage in Lead Induced by Decaying Shock

Mesoscopic Picture of Fracture in Porous Brittle Material under Shock Wave Compression

Analysis Of Wave Velocity Characteristics Of Critical Rock Brittle Failure

Dependence of Tungsten Crack Behaviors on Heat Source Parameters under Transient Heat Flow

Macroscopic Shock Plasticity of Brittle Material Through Designed Void Patterns

Tailoring the adiabatic shear susceptibility of pure tungsten via texture evolution

Shock-induced damage and dynamic fracture in cylindrical bodies submerged in liquid

Revealing impact failure behavior of tungsten composite using instrumented Charpy impact testing