Abstract:Selective conversion of renewable sources is necessary for developing energy generation technology and protecting the environment. Herein, this work reports a one-step controllable synthesis of trimetallic NiCoFe-layered double hydroxides (NiCoFe-LDHs) nanosheets (1.36 nm) for both an efficient oxygen evolution reaction (OER) and highly selective oxidation of biomass-derived 5-hydroxymethylfurfural (HMFOR) into value-added 2,5-furandicarboxylic acid (FDCA). For comparison, two sets of bimetallic NiCo- and NiFe-LDHs were similarly synthesized and evaluated. In the OER process, the optimal NiCoFe-LDHs nanosheets exhibited the lowest necessary overpotential (288 mV) to reach 10 mA cm–2 and the smallest Tafel slope of 92 mV dec–1 compared with NiCo-LDHs (347 mV, 115 mV dec–1) and NiFe-LDHs (303 mV, 108 mV dec–1). The performance was also superior to most previously reported LDHs catalysts. Additionally, NiCoFe-LDHs nanosheets exhibited a much smaller charge transfer resistance (Rct) of 1.0 Ω and a larger Cdl value of 2.62 mF cm–2 compared with NiCo-LDHs (2.1 Ω, 1.94 mF cm–2) and NiFe-LDHs (1.4 Ω, 2.22 mF cm–2), indicating fast catalytic kinetics. Furthermore, the NiCoFe-LDHs nanosheets possessed excellent durability over 10 h, much better than that of NiCo- and NiFe-LDHs. NiCoFe-LDHs catalysts also exhibited high performance in the oxidation of 5-hydroxymethylfurfural (HMF) to FDCA, which is a key precursor for the sustainable synthesis of polymers (e.g., polyethylene 2,5-furandicarboxylate (PEF)). An ultralow overpotential of 280 mV was required to achieve 20 mA cm–2, nearly 120 mV less than the activity in pure 1.0 M NaOH. The reaction intermediates and products were qualified by liquid chromatography–mass spectroscopy system (LC-MS) and LC, where 95.5% conversion of HMF and 84.9% yield of FDCA were obtained in 1 h. The reaction kinetics and possible pathways were further investigated. As a unique report utilizing trimetallic LDHs catalysts for OER and HMFOR, this study provides a promising perspective for energy conversion and electrocatalytic processing of biomass-derived monomers.

Hierarchical copper oxide@nickel-cobalt layered double hydroxide for efficient 5-hydroxymethylfurfural electro-oxidation in alkaline seawater

Selective electrooxidation of 5-hydroxymethylfurfural at low working potentials promoted by 3D hierarchical Cu(OH)2@Ni3Co1-layered double hydroxide architecture with oxygen vacancies

Ultrathin layered double hydroxides nanosheets array towards efficient electrooxidation of 5-hydroxymethylfurfural coupled with hydrogen generation

Electrochemical Oxidation of 5-Hydroxymethylfurfural with NiFe Layered Double Hydroxide (LDH) Nanosheet Catalysts

Highly efficient electrooxidation of 5-hydroxymethylfurfural (HMF) by Cu regulated Co carbonate hydroxides boosting hydrogen evolution reaction

Trimetallic NiCoFe-Layered Double Hydroxides Nanosheets Efficient for Oxygen Evolution and Highly Selective Oxidation of Biomass-Derived 5-Hydroxymethylfurfural

Highly Active NiFe LDH anchoring on Cobalt Carbonate Hydroxide for Efficient Electrocatalytic 5-hydroxymethylfurfural oxidation towards 2,5-furandicarboxylic acid

Heterogeneous interface induced Co3O4-NiO catalyst for efficient electrocatalytic 5-Hydroxymethylfurfural oxidation

Regulating the Electronic Structure of Ni Sites in Ni(OH)2 by Ce Doping and Cu(OH)2 Coupling to Boost 5-Hydroxymethylfurfural Oxidation Performance

Highly Ordered Mesoporous Co3 O4 Electrocatalyst for Efficient, Selective, and Stable Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

Cross-linked α-Ni(OH) 2 nanosheets with a Ni 3+ -rich structure for accelerating electrochemical oxidation of 5-hydroxymethylfurfural

Engineering the Electronic Structure of NiFe Layered Double Hydroxide Nanosheet Array by Implanting Cationic Vacancies for Efficient Electrochemical Conversion of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

Metal Vacancy-Enriched Layered Double Hydroxide for Biomass Molecule Electrooxidation Coupled with Hydrogen Production

High-Entropy Engineering in Hollow Layered Hydroxide Arrays to Boost 5-Hydroxymethylfurfural Electrooxidation by Suppressing Oxygen Evolution

Tuning the adsorption behaviors of non-noble electrocatalysts to boost valorization of 5-hydroxymethylfurfural

A Hierarchical CuO Nanowire@CoFe-Layered Double Hydroxide Nanosheet Array as a High-Efficiency Seawater Oxidation Electrocatalyst

Efficient electrocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid with Fe-Ni3S2@NiFe-PBA nanocubes

H 2 O 2 -assisted fabricate nickel cobalt sulfide as the efficient catalyst for the novel strategy of 5-hydroxymethylfurfural stepwise electrolysis

Unilamellar MnO2 nanosheets confined Ru-clusters combined with pulse electrocatalysis for biomass electrooxidation in neutral electrolytes

Electrocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid via metal-organic framework-structured hierarchical Co3O4 nanoplate arrays

Hierarchical Nickel–Cobalt‐Based Transition Metal Oxide Catalysts for the Electrochemical Conversion of Biomass into Valuable Chemicals