Abstract:Despite their advantages compared to hydraulic actuators, electric actuators are prone to overheating due to their high heat dissipation. So, developing reliable cooling systems for electric actuators is a crucial task, especially for aerospace applications which require the fulfillment of high safety requirements. In this paper, an air-cooling system utilizing wing bay air is investigated. An axial fan sucks air to flow through a shrouded-fin surface attached to the motor housing. A CFD model is developed to study the heat transfer and air flow processes over the finned surface. The relation between the fan pressure jump with the volumetric flow rate of a high speed SUNON fan at different rotational speeds and ambient pressures is measured in a fan loop and incorporated in the model. To validate the CFD results, a test rig consisting of a finned surface brazed on a heated aluminum cylindrical block and attached to a fan is built. The predicted and measured temperatures at different locations in the aluminum block show good agreement when the numerical simulation is performed using the k-ω-SST turbulence model. The average discrepancy of the predicted and measured steady state temperature differences (T-T∞) reduces from 1.6 °C for the k-ε Realizable model to 0.31 °C for the k-ω SST model. Numerical simulation is performed to predict the effect of fin shape, fin number and fin thickness on the cooling performance of the fin structure. The results show that the straight plate fin configuration outperforms the offset-strip and corrugated fin. Also, it is found that there is an optimum value for the fin number, and this optimum fin number changes with the fan rotational speed and ambient pressure. Reducing the solidity of the fin structure by reducing the fin thickness results in improving the thermal performance when the fan operates at a low ambient pressure (0.2 atm). By comparing all data, it is found that the straight fin structure with 110 fins and fin thickness 0.2 mm is the optimum one. For fan speed of 12,000 rpm, this structure can restrict the thermal resistance between 0.17 °C/W at 0.2 atm and 0.047 °C/W at 1.0 atm.

Application of Structure Functions for the Investigation of Forced Air Cooling

Dynamic Thermal Analysis of a Power Amplifier

Analytical Modeling of Forced-Air Cooling Heatsink by Considering Air Temperature Rise in Channel and Coupling of Multiple Heat Sources

Study of Heat Conduction Transfer Functions of Fins

Study and optimization on characteristics of temperature field in forced convection oven

Effective medium theory for thermal scattering off rotating structures.

Experimental and Numerical Investigation of a Multifunctional CFRP towards Heat Convection under Aircraft Icing Conditions

Simulation des Grandes Échelles d'un écoulement d'air turbulent pour le refroidissement d'amplificateurs de lasers

Analysis performance of forced convection cooling using synthetic jets with wave variations (sine, square, and triangular)

Thermal Design and Structure Optimization of a Signal Controlling and Processing Equipment

Study on similarity criterion for fluid-thermal coupling responses of metal plate simultaneously exposed to laser irradiation and airflow

Application of a CFD tool for system-level thermal simulation

Cold plate performance enhancement based on parametric modeling of multiple structures

Systematic Investigation On Conjugate Heat Transfer Rates Of Film Cooling Configurations

Interfacial Heat Transfer Characteristics and Thermal Expansion Behavior of Heterostructure Materials in Arc-Heated Wind Tunnel

A parametric fin structure design study for cooling aerospace electro-mechanical actuators with high-speed axial fans

Thermal Test Apparatus for Mini Heat Sinks

Heat transfer of insulation structure for large cryogenic wind tunnel

Thermal-Fluid-Solid Coupling-Parametrical Numerical Analysis of Hot Turbine Nozzle Guide Vane

The Study of Effects of Fin Parameters on Thermal Hydraulic Performance of a Vehicular Charged Air Cooler

Test for Thermoelectric Self Cooling