Abstract:The SOLPS-ITER code is utilized to analyze the boundary plasma associated with a fast-flow lithium (Li) divertor configuration in the Fusion Nuclear Science Facility (FNSF) tokamak and identify operational regimes with acceptable divertor and core conditions. Plasma transport from the SOLPS-ITER code has been coupled with a liquid metal (LM) MHD/heat transfer code to model a Li open-surface divertor design and assess its impact on the scrape-off-layer (SOL) and core plasma performance. Simulations with only Neon (Ne) impurity seeding have been conducted to evaluate its impact on meeting FNSF design demands for the divertor and upstream plasma parameters. Simulation results indicate that Ne seeding significantly mitigates divertor heat flux but potentially reduces both upstream electron and main ion density due to fuel dilution. The combined application of Ne seeding and deuterium (D 2 ) puffing is required to satisfy the FNSF design requirements on upstream density (1e20) and divertor energy flux ( < 10 MW/m 2 ). D 2 puffing plays a role in counteracting upstream density drops and augmenting energy and momentum losses through atomic and molecular processes. The inlet Li flow velocity is systematically varied across a wide range to identify acceptable flows and corresponding LM surface temperatures. This comprehensive analysis identifies the acceptable Li flow parameters, LM surface temperature, and emitted Li fluxes necessary to meet the major design constraints. The emitted Li fluxes exhibit minimal impact on the main plasma at surface temperatures up to approximately 525^C, corresponding emitted Li fluxes of up to 2e23 atoms/s. Uncertainties in the Li emission processes from the surface are also investigated, primarily influencing Li loss in the lower surface temperature range (525C). Conversely, evaporation predominantly drives the Li loss processes at higher surface temperature ranges (525C), contaminating both the divertor and upstream plasma.

Investigation of hydrodynamic characteristics of Li jet flowing along concave flow channel using LES for A-FNS

OV / 4-5 1 Overview of Experimental Results on the HL-2 A Tokamak

Overview of Experimental Results on the HL-2A Tokamak

Investigation of applicability of long-distance LP system for Li target diagnostics in Fusion Neutron Source

Evaluation of influence of wall roughness on wall turbulence using LES simulation with MSGD model for liquid Li flow inside two-staged contraction nozzle

Ultrasonic Doppler Velocimetry Experiment of Lead-Lithium Flow with Oroshhi-2 Loop

Two-Phase Flow Simulation of Gas Entrainment Phenomena in Large-Scale Experimental Model of Sodium-Cooled Fast Reactor

Analysis and design of Fast Flow Liquid Li Divertor for Fusion Nuclear Science Facility (FNSF) using coupled plasma boundary and LM MHD/heat transfer codes

Activities on the Laser Fusion Reactor Koyo-F in Japan

Experimental study of MHD effects on turbulent flow of Flibe simulant fluid in circular pipe

Investigation of Condensed Liquid Film Flow on Chamber Ceiling of Laser-Fusion Reactor

Advances in Direct Numerical Simulation for MHD Modeling of Free Surface Flows

ICONE15-10736 EXPERIMENTAL STUDY ON LIQUID FILM BEHAVIOR IN 3X3 ROD BUNDLE CHANNEL SIMULATED NUCLEAR FUEL ASSEMBLY

Investigation of Energetic Ion Losses Induced by Long-Lived Saturated Internal Mode with Energetic Particle Diagnostics in the HL-2A Tokamak

Large Eddy Simulation on the Lead-Bismuth Eutectic Jet at Reactor Core Outlet

Experimental study of the flow fields of the impinging jet flames using Laser Doppler Velocimetry (LDV)

Numerical Investigation of Buoyant Effect on Flow and Heat Transfer of Lithium–Lead Eutectic in DFLL–TBM

Ion Beam Heating of Liquid Jet Li Target for the Super-FRS

High Energy Density Physics Problems Related to Liquid Jet Lithium Target for Super-Frs Fast Extraction Scheme

Research on the vortical and turbulent structures in the lobed jet flow using laser induced fluorescence and particle image velocimetry techniques

Experimental Investigation of the Flowing Lithium Limiter. Part 1. the Spreading Characteristics of Lithium on Solid Substrate Without an External Magnetic Field