Abstract:Here, through the effective passivation of thick film defects in perovskite by employing the RbX addition strategy, the crystalline quality, enhances the device performance of bifacial perovskite solar cells (PSCs), positioning them at the forefront of current research in this field. The front photovoltaic conversion efficiency reaches 21.04%, with a bifaciality of ≈80%, achieving an power generation density (PGD) of 24.36 mW cm−2 at a albedo of 0.2. Bifacial perovskite solar cells (PSCs) possess a dual light‐absorbing structure, which enables higher power output at lower additional costs. However, the replacement of metal electrodes with transparent ones leads to serious light loss, necessitating a thicker perovskite layer to compensate for this drawback. In this study, the impact of different rubidium halide (RbCl, RbBr, and RbI) additives is systematically investigated on precursor solubility and the quality of micron‐sized perovskite thick films prepared using a two‐step method. It is observed that RbCl exhibited the strongest interactions with PbI2, enhancing its solubility and leading to the formation of multihole PbI2 films that promote subsequent crystallization of thick perovskite film. Additionally, the RbCl‐based perovskite film demonstrates a narrowed bandgap attributed to the formation of a‐FAPbI3. Consequently, the short‐circuit current density (Jsc) and open‐circuit voltage (Voc) in the RbCl‐based bifacial PSCs are simultaneously enhanced, and a record efficiency of 20.86% (21.04% certified) is also obtained among n‐i‐p bifacial PSCs, exhibiting an ≈80% bifaciality and a power generation density (PGD) exceeding 24 mW cm−2 with a reflectivity value of 0.2. More importantly, the optimized device does not show any performance degradation after continuous illumination under 1sun for 1000 h.

Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance

Efficient and Stable Perovskite Solar Cells by Fluorinated Ionic Liquid–Induced Component Interaction

Understanding the Role of Cesium and Rubidium Additives in Perovskite Solar Cells: Trap States, Charge Transport, and Recombination

Rubidium Halide Additive Engineering for Efficient and Stable Bifacial Perovskite Solar Cells

Efficient and stable Ruddlesden–Popper perovskite solar cell with tailored interlayer molecular interaction

Bifunctional Lewis Base‐Assisted Fabrication of High‐Quality CsPbIBr2 Perovskite for Efficient and Stable Solar Cells

Covalent Bonding Strategy to Enable Non-Volatile Organic Cation Perovskite for Highly Stable and Efficient Solar Cells

Improved Moisture Stability of Perovskite Solar Cells Using N719 Dye Molecules

Improved Absorber Phase Stability, Performance, and Lifetime in Inorganic Perovskite Solar Cells with Alkyltrimethoxysilane Strain-Release Layers at the Perovskite/TiO<sub>2</sub> Interface

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency

Efficient and Stable Inverted Perovskite Solar Cells Incorporating 4-Fluorobenzylammonium Iodide

In Situ Cesium Modification at Interface Enhances the Stability of Perovskite Solar Cells

Moisture tolerant solar cells by encapsulating 3D perovskite with long-chain alkylammonium cation-based 2D perovskite

Organic molecule and inorganic salt synergistic modified SnO2 for efficient perovskite solar cells

Bulky ammonium iodide and in-situ formed 2D Ruddlesden-Popper layer enhances the stability and efficiency of perovskite solar cells

Surface Reaction Induced Compressive Strain for Stable Inorganic Perovskite Solar Cells

Stabilization of FAPbI3 with Multifunctional Alkali‐Functionalized Polymer

Solvent-controlled growth of inorganic perovskite films in dry environment for efficient and stable solar cells

Interpretation of Rubidium‐Based Perovskite Recipes toward Electronic Passivation and Ion‐Diffusion Mitigation

Role of Dibenzo Crown Additive for Improving the Stability of Inorganic Perovskite Solar Cells

Stability enhancement of perovskite solar cells using multifunctional inorganic materials with UV protective, self cleaning, and high wear resistance properties