Abstract:Magnesium rare-earth (Mg-RE) alloys have great potential in lightweight applications because of the high specific strength. Wire-arc directed energy deposition (WA-DED) exhibits great prospects for the fabrication of large-scale monolithic structural components with high manufacturing flexibility. In this work, a single-pass multilayer Mg‐10Gd‐3Y‐1Zn‐0.5Zr (wt%, GWZ1031K) deposit was prepared via WA-DED. Electron backscatter diffraction (EBSD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) are conducted to systematically explore the microstructural evolution during the WA-DED process and the subsequent heat treatment . The GWZ1031K alloy deposit fabricated by WA-DED exhibits uniform equiaxed grain structure whose average grain size is 22.3 ± 5.6 μm. The (Mg,Zn) 3 (Gd,Y) phase and RE segregation can be observed along the α-Mg grain boundaries (GBs). A number of needle-like γ ́ /γ ́ ́ phases embedded in the α-Mg grain interior (GI). In addition, there is a small number of fine RE-rich cubic phase and (Gd,Y) 2 O 3 particles. The deposit shows significantly enhanced ductility and slightly improved strength after solution treated at 500 °C for 12 h. After the solution treatment, the intergranular (Mg,Zn) 3 (Gd,Y) eutectics dissolve into the matrix and long period stacking ordered (LPSO) phases precipitate from the GBs into the GI, contributing to the enhancement in ductility. Besides, the LPSO phase along with the existing RE-rich cubic phase, (Gd,Y) 2 O 3 and Zr particles at GBs also play a role in hindering grain growth. The high-density nanoscale β ́ phases appear in the GI after aging treated at 200 °C for 24 h, resulting in the remarkable precipitation strengthening. In comparison with the solution-treated GWZ1031K deposit, the aging-treated exhibits a prominently improved ultimate tensile strength of 337 ± 7 MPa in the building direction (BD) and 331 ± 5 MPa in the travelling direction (TD). It is envisaged that the WA-DED manufacturing method will provide a simple and effective route to fabricate large-scale Mg-RE alloy components for various applications.

Exceptional mechanical properties of wire arc additive manufactured Mg-9Gd-3Y-0.5Zr alloy induced by promoted precipitation behavior

Enhanced High-Temperature Strength and Ductility of Wire Arc Additive Manufactured Al-Ce-Mg Alloys with Fine Α-Al/al11ce3 Eutectics

Revealing precipitation behavior and mechanical response of wire-arc directed energy deposited Mg-Gd-Y-Zr alloy by tailoring aging procedures

High-strength Mg‐10Gd‐3Y‐1Zn‐0.5Zr alloy fabricated by wire-arc directed energy deposition: Phase transformation behavior and mechanical properties

Effect of heat treatment on the microstructure and mechanical properties of Mg-Gd-Y-Zr alloys fabricated by wire arc additive manufacturing

Microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr alloy fabricated by cold metal transfer wire arc additive manufacturing

Achieving excellent strength-ductility combination of Al-aided Mg-Gd-Al-Zr-Zn alloys fabricated by cold metal transfer-based wire-arc directed energy deposition via uniform equiaxed grains and multiple precipitates

Customized heat treatment process enabled excellent mechanical properties in wire arc additively manufactured Mg-RE-Zn-Zr alloys

Excellent isotropic mechanical properties of directed energy deposited Mg-Gd-Y-Zr alloys via establishing homogeneous equiaxed grains embedded with dispersed nano-precipitation

Achieving fully equiaxed grain microstructure and isotropic mechanical properties in wire arc additive-manufactured Mg-Y-Nd-Zr alloys

Microstructure evolution and mechanical properties of wire arc additively manufactured Mg-Gd-Y-Zr alloy by post heat treatments

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Achieving high strength-ductility of Al-Zn-Mg-Cu alloys via hot-wire arc additive manufacturing enabled by strengthening precipitates

Wire arc additive manufacturing of a novel ATZM31 Mg alloy: Microstructure evolution and mechanical properties

Microstructure and Mechanical Properties of Thick-Walled WE43A Alloy Fabricated by Wire Arc Additive Manufacturing

Microstructure and mechanical properties of a dilute Mg-Gd-Y-Zr alloy fabricated using wire-arc directed energy deposition additive manufacturing

Microstructure and mechanical properties of wire arc additive manufactured ZL205A alloy

Influence of rare earth addition on microstructures and mechanical properties of high-pressure die casting Mg–8Zn–6Al alloy

Microstructure and mechanical properties of high strength Mg−15Gd−1Zn−0.4Zr alloy additive-manufactured by selective laser melting process

Formability, microstructure evolution and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy using gas tungsten arc welding

Microstructure tuning enables synergistic improvements in strength and ductility of wire-arc additive manufactured commercial Al-Zn-Mg-Cu alloys