Abstract:With the depletion of river sand and the rising price of quartz sand, more and more researchers are trying to use manufactured sand to prepare ultra-high performance concrete (UHPC). However, due to the large amount of fine particles and high water demand, few studies are available to directly use the manufactured sand in its original state to prepare UHPC. To overcome the above problems, in this study, two locally available recycled manufactured sands are used as aggregates, and an attempt is made to maximize the use of their original gradation to prepare a cleaner construction production integrating high flowability, excellent mechanical per-formance, high cost-effective and environmentally-friendly property that meets the engineering requirements. The properties of workability, mechanical strengths, volume stability, hydration degree, pore structures, morphology of interfacial transition zone (ITZ), carbon emission and production cost are evaluated and dis-cussed. Results indicate that all the mixtures prepared in this study can be considered to have high flowability except when granite sand is completely used. The mixture containing 75% tuff sand can even reach a compressive strength of 166.2 MPa, which is 10.5% higher than the reference one. A reduction of 28.9% can be observed in the early-age autogenous shrinkage of tuff sand UHPC as compared to the reference specimen. The mercury intrusion porosimetry (MIP) and X-ray computed tomography (X-CT) results demonstrate that the micropore volume, porosity and number of mesopores of UHPC increase to a certain extent when manufactured sand is utilized. The scanning electron microscope (SEM) observation reveals the most compact ITZ between cement paste and waste tuff sand. Additionally, the recycled manufactured sand UHPC can diminish the carbon emission of 19 kg and the cost of 27.4% (granite sand) and 25.5% (tuff sand) per cubic meter, showing excellent environmental and economical benefits.

Performance enhancement of engineered cementitious composite through tailoring recycled iron sand

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Recycling Stone Powder As a Partial Substitute for Cementitious Materials into Eco-Friendly Manufactured Sand Ultra-High Performance Concretes: Towards Cleaner and More Cost-Effective Construction Production

Development of Engineered Cementitious Composites (ECCs) Incorporating Iron Ore Tailings as Eco-Friendly Aggregates

An Economical Ultra-High Ductile Engineered Cementitious Composite with Large Amount of Coarse River Sand

Development of Sustainable Engineered Cementitious Composites by Incorporating Local Recycled Fine Aggregate

Preparation and Mechanical Characterization of Cost-Effective Low-Carbon Engineered Cementitious Composites with Seawater and Sea-Sand

Effects of Different Mixing Ratio Parameters on Mechanical Properties of Cost-Effective Green Engineered Cementitious Composites (ECC)

Preliminary Analysis of the Ductility and Crack-Control Ability of Engineered Cementitious Composite with Superfine Sand and Polypropylene Fiber (SSPP-ECC)

High-strength seawater sea-sand Engineered Cementitious Composites (SS-ECC): Mechanical performance and probabilistic modeling

Preparation and mechanical characterization of engineered cementitious composites with high-volume fly ash and waste glass powder

Enhanced Ductility and Toughness of Desert Sand Engineered Cementitious Composites

Eco-Friendly, High-Ductility Slag/Fly-Ash-Based Engineered Cementitious Composite (ECC) Reinforced with PE Fibers

Effect of Fiber Content on the Mechanical Properties of Engineered Cementitious Composites with Recycled Fine Aggregate from Clay Brick

Efficient Utilization of Waste Marine Clay for Fine Aggregate to Develop Sustainable and Cost-Effective Strain-Hardening Cement-Based Composites

Upcycling use of red mud-based solid waste in engineered cementitious composites: Properties, activation mechanism, and life-cycle assessment

Greener Engineered Cementitious Composite (ECC) – the Use of Pozzolanic Fillers and Unoiled PVA Fibers

Assessment of mechanical and heavy metal leaching behavior of resource-efficient engineered cementitious composites incorporating ultra-high-volume municipal waste incineration bottom ash

Investigation of the Mechanical Properties of Engineered Cementitious Composites with Low Fiber Content and with Crumb Rubber and High Fly Ash Content

Development of Low-Carbon Sea Sand Engineered Cementitious Composites (lseccs): Performance, Cracking Behavior and Trilinear Tensile Constitutive Model