Abstract:Engineering Cementitious Composites (ECC) are fibre-reinforced cementitious materials with excellent tensile strain capacity. Recycling powder from building and demolition waste can improve the ecological efficiency of concrete and reduce the cost of raw materials. In this study, recycled glass powder (RGP) was used to partially replace traditional cement. Based on using a 1:1 replacement of recycled brick powder (RBP) and recycled concrete powder (RCP) for fine aggregates, two sets of variables were set: the RGP substitution rate (10 %, 15 %, 20 %, and 25 %) and RGP particle-size range (38-75 mu m, 75-150 mu m, and 150-300 mu m). Comprehensive material testing and mechanical experiments were conducted, including X-ray diffraction analysis, thermogravimetric analysis, shrinkage tests, uniaxial compressive tests, uniaxial tensile tests, and scanning electron microscopy. The results indicated that fully substituting quartz sand with RBP and RCP enhanced the ECC performance. Incorporating RGP significantly improved the ultimate tensile strain and crack-propagation ability of the ECC while reducing the 90-d shrinkage rate. The 28-d compressive strength and tensile strength have some loss, but can meet the strength requirements. SEM showed that incorporating RGP weakened the bonding strength of the fibre matrix, making it easier for the fibres to be pulled out. By evaluating the experimental results, the mix ratio of a 20 % substitution rate and 75-150-mu m size was selected. A material-sustainability indicator (MSI) analysis of the raw materials and production process of RGP-ECC was performed. The embodied energy, carbon emissions, and economic indices were reduced to a certain extent, thereby improving the ecological efficiency of concrete.

Effect of Fiber Content on the Mechanical Properties of Engineered Cementitious Composites with Recycled Fine Aggregate from Clay Brick

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

Development of Sustainable Engineered Cementitious Composites by Incorporating Local Recycled Fine Aggregate

Deformability enhancement of fiber-reinforced cementitious composite by incorporating recycled powder

Strategies for Reusing Multiple Recycled Powders: Evaluating the Mechanical Performance and Sustainability of Engineered Cementitious Composites (ECC)

Effect of PE Fiber Content on Mechanical Behavior of Cementitious Composite

The Effect of Recycled Sand on the Tensile Properties of Engineered Cementitious Composites

Mechanical Properties of Ecological High Ductility Cementitious Composites Produced with Recycled Crumb Rubber and Recycled Asphalt Concrete

Effect of Fiber Type and Volume Fraction on Fiber Reinforced Concrete and Engineered Cementitious Composite Mechanical Properties

Micro-structural and Mechanical Properties of Ultra-High Performance Engineered Cementitious Composites (UHP-ECC) Incorporation of Recycled Fine Powder (RFP)

Using Green Supplementary Materials To Achieve More Ductile Ecc

Crack Development and Fracture Performance of Recycled Powder Engineered Cementitious Composites (ECC): Experimental Investigation

Effects of Different Mixing Ratio Parameters on Mechanical Properties of Cost-Effective Green Engineered Cementitious Composites (ECC)

Investigation of the Mechanical Properties of Engineered Cementitious Composites with Low Fiber Content and with Crumb Rubber and High Fly Ash Content

Multiscale Investigation on the Performance of Engineered Cementitious Composites Incorporating PE Fiber and Limstone Calcined Clay Cement (LC 3 ).

Study of Mechanical Properties of an Eco-Friendly Concrete Containing Recycled Carbon Fiber Reinforced Polymer and Recycled Aggregate

Assessment of mechanical and heavy metal leaching behavior of resource-efficient engineered cementitious composites incorporating ultra-high-volume municipal waste incineration bottom ash

Value-Added Recycling of Waste Brick Powder and Waste Sand to Develop Eco-Friendly Engineered Geopolymer Composite

Preparation and mechanical characterization of engineered cementitious composites with high-volume fly ash and waste glass powder

Preparation and Properties of Green High Ductility Geopolymer Composites Incorporating Recycled Fine Brick Aggregate

Pore Structure Characteristics and Mechanical Property of Engineered Cementitious Composites (ECC) Incorporating Recycled Sand