Abstract:This article investigates the microstructure evolution, phase formation, and magnetic properties of Co2FeCr0.5Alx (x = 0.9, 1.2) complex component alloys, as a function of heat treatment temperatures (at 500, 600, 700, and 1150°C), using XRD, optical microscopy, electron microscopy and vibrating sample magnetometry (VSM). The alloy with 20.4 at% Al (x= 0.9), identified here as C1, consisted of microscale BCC1 phase and BCC nanoscale particles containing mainly Fe and Cr, and B2 matrix with mainly Al and Co. Partial transformation of the BCC1 phase to an FCC phase was observed at 700°C and full transformation at 1150°C, through twinning. For the sample with 25.5 at% Al (x= 1.2), identified as sample C2, there were only nanoscale BCC particles in the B2 matrix with the same element segregation between the phases as C1. This increase in Al (from x= 0.9 to 1.2) content stabilised the B2 matrix phase, reduced the grain size, and increased both saturation magnetisation (Ms) and coercivity (Hc). Moreover, increasing the heat treatment temperature resulted in an increase in grain size of the B2 matrix, volume fraction and average size of the micro BCC 1 and nanoscale BCC phases for both C1 and C2, which also modified the soft magnetic properties, with Ms and Hc increasing up to 600°C followed by a decrease until 1150°C. Using the structural information as inputs for density functional theory calculations of Hc and Ms, it has been found that the Hc is influenced by the grain size of the matrix, and the volume fraction and size of the BCC1 phase at temperature higher than 600°C for C1 and 700°C for C2, but is controlled by nanoscale BCC particles below these temperatures. The Ms is controlled by the elemental diffusion and segregation. Thus, the best combination of Hc and Ms was seen with antiferromagnetic Cr segregated and partitioning in the microscale BCC1 phase, and a B2 matrix with less Cr rich precipitation, formed at 500°C, where the misfit strain between B2 matrix and nanoscale BCC was low.

Composition interpretation of Co-Cr industrial alloys using cluster formula approach

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Homogenizing Effects of Co on Multi-Scale Elemental Distribution in Ru-containing Ni-based Single Crystal Superalloys

FCC-to-HCP Phase Transformation in CoCrNix Medium-Entropy Alloys

How Atomic Bonding Plays the Hardness Behavior in the Al–Co–Cr–Cu–Fe–Ni High Entropy Family

Formation of hypoeutectic structure and strengthening mechanism of Co4Cr1.5Fe1.5Ni5 high entropy alloy alloyed by Al

Alloying effects and effective alloy design of high-Cr CoNi-based superalloys via a high-throughput experiments and machine learning framework

Accelerated discovery of composition-carbide-hardness linkage of Stellite alloys assisted by image recognition

Microstructural Modelling Solution for Complex Co Based Alloys and Coatings

Influence of W, Mo and Ti trace elements on the phase separation in Al8Co17Cr17Cu8Fe17Ni33 based high entropy alloy

The preliminary exploration of composition origin of solid solution alloys used in thermocouple by cluster-plus-glue-atom model

Investigation of the Elemental Partitioning Behaviour and Site Preference in Ternary Model Nickel-Based Superalloys by Atom Probe Tomography and First-Principles Calculations

Electron Theory Study on Mechanism of Action of Cobalt in Fe-Co-Cr Based High-Alloy Steel

Composition design, microstructure, and mechanical properties of novel Ti–Co–Ni–Zr complex concentrated alloys

Designing novel AlCoCrNi eutectic high entropy alloys

High-throughput pseudo-binary diffusion couple approach for alloy design in cobalt-based superalloys

Composition and phase structure dependence of magnetic properties for Co2FeCr0.5Alx (x=0.9, 1.2) multi principal component alloys

Fcc and Bcc Equivalents in As-Cast Solid Solutions of Alxcoycrzcu0.5fevniw High-Entropy Alloys

Facilitated the discovery of new γ/γ′ Co-based superalloys by combining first-principles and machine learning

Formation Mechanisms for (cr,co)7c3/(cr,co)23c6 Heterogeneous Precipitates and Stacking Faults Around Carbides in Surfacing Welding of Stellite Alloy on Stainless Steel

Tailoring coating composition for the associated microstructural stability of a single-crystal superalloy: an experimental and simulation study